AUTOOL SDT205S Car Smoke Leak Detector Pipe Leak Locator Automotive EVAP System Smoke Leakage Analyzer Detector Diagnostic Tool
How do you do a leak test?
1. Fill 10ml baby oil to the detector for the first time. Open the engine cover and hang the detector on the cover.
2. Disconnect the tube that needs to be connected to the detector.
3. connect detector with DC12V battery, turn on the power switch and the detector starts to work.
4. In about 30 seconds, the pipe will be filled with smoke. Check for leaks. Please use a headlamp if necessary.
Autool sdt 205s car smoke leak detector features:
1.[Wide range of applications]: for detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats. Suitable for all car models.
2.[Powerful and easy to use]: The autool sdt 205s has its own air pump without relying on other machines and pressure gauges with precise scales. Just connect the detector with DC12V battery, it can output thick smoke within 30s after power on.
3.[advanced technology]: it works on the evap system. (With another version specially designed for evap system). Equipped with two flow meters for accurate data display and independently controlled air mode and smoke mode.
4.[Overheat & Freeze Protection]: This smoke detector has intelligent protection, when it exceeds the working limit, such as over 75℃, it will automatically turn off the power to ensure the safety of the operator and the device.
Caution:
1. When using this Autool sdt 205s car smoke leak detector for the first time, fill with 10ml of oil. Please be careful not to exceed this area.
2. the test liquid: both liquid paraffin and baby oil are ok.
3. Fresh oil can only be filled when the smoke becomes thin, and it cannot be filled over 20ml every time.
4. Before filling fresh oil, please pour out the left oil in the detector and replace the detector oil regularly.
5. During the process of leak detection, please keep away from smoke-sensitive parts.
6. Do not run the detector continuously for more than 8 minutes. It needs interval rest.
7. The detector has intelligent protection, when it exceeds the working limit, such as above 75℃, it will automatically turn off the power. In this case, please operate it later.
8. The round part of this detector has temperature, please be careful to avoid burns.
9. If the test tube needs to be separated in the middle, please secure the other side with a rubber stopper.
Packing list:
1pc * autool sdt 205s car smoke leak detector main unit
1pc * hook (tighten with hand nuts)
1pc * rubber connect parts
1sets * hard rubber hose plug (with serial specification)
1 sets * soft rubber hose plug (with serial specification)
CHF
