Autool HTS558 Walnut Powder Engine Intake Manifold Valve Clean Machine is an advanced equipment for clean engine intake carbon deposit. Keep the motor in a healthy condition, make sure the motor delivers high quality consistently.
Autool hts558 car engine carbon deposit cleaner function:
1.【 Deep Removal of Carbon Deposits 】 Deeply remove the highly sticky carbon deposits on the intake manifold, intake and exhaust valves. (Solve the problems of unstable idling, insufficient fuel combustion and reduced air-fuel ratio.)
2.【External Air Source】This allows the walnut sand grain to hit the carbon deposits more powerfully and efficiently.
3.【Built-in Dust Filter】It can separate the recovered walnut sand grain from carbon deposits for recycling.
4.【Integrated Design】The walnut sand grain can be sprayed and restored at the same time.
How to use?
1. open head cover of autool hts558 and pour into walnut powder(need 2-4kg), press dust cover on walnut powder then close cover.
2. Spary Gun muzzle and recycle hose together. (there is a hole on recycle tubing)
3. Remove the engine intake manifold, insert the spray gun into the intake, turn the crankshaft to close the intake valve. Then connect the high pressure air pump ((not included)) to hts558.
4. connect AC power, start clean. The process should take 1-3 minutes. (Depending on the circumstances of carbon capture)
5. connect autool hts558, check cleaning result. Normally, walnut powder can be reused 5-10 times. (depending on the circumstances of carbon capture)
Recommend reason:
1 Air pump pressure should be more than 0.7Mpa (7bar/102psi)
2 walnut powder diameter should be between 0.4-0.8mm, amount in 2-4kg (4-9lb)
3 cleaning time between 1-3 minutes
bullet point:
-Autool hts558 is a special machine for engine intake manifold and intake valve backside clean.
-Close intake valve, then spray walnut powder into engine intake via air pump (not included) while hts558 recycles walnut powder by vacuum.
-This is a closed loop. Walnut powder affects the carbon deposition on the inner wall of the intake manifold. After thousands of impacts, the carbon deposit will be thoroughly clear
-Chemical cleaning agent corrodes pipe and shortens engine life.
- Walnut powder is pure natural polishing material. It shows high performance in hardness, anti-pressure and wear resistance.
- Walnut powder hardness was lower than metal but higher than carbon segregation. take these advatages,
-Autool hts558 cleans clean intake manifold and back of intake valve thoroughly but no damage
-High precision engine system is sensitive to intake pipe foreign matter, such as bmw valve tronic system.
-Therefore we need autool hts558 to clean the carbon deposit in intake pipe. Motor should be closed before cleaning,
-Then rotate the crankshaft to close the intake valve. Autool hts558 clean an intake pipe every time
-6 cylinder engine should be cleaned 6 times one by one (and so on).
-Autool hts558 is specail for intake manifold and intake valve rear clean only,
-If you want to clean carbon deposit on injector/throttle valve/cylinder, please choose autool ct150, autool ct200 or autool c100.
-Walnut powder not included in package, please get it in local market;
- High pressure air pump is requirement (not included in the package);
- Walnut powder residue in the intake pipe will turn to ash in the high temperature after engine start.
Package included:
1x AUTOOL HTS558 unit
2 x spray guns
1x glasses
1x recycle hose
1x recycling hose and spray gun connector
CHF
