Autool ast605 auto pulsating brake oil changer single clutch slave cylinder brake suction oil pump machine for all vehicles
-Applicable to European, American and Asian car models:
-For a sub pump changing oil at the same time, it is fast and labor-saving.
-Adjustable pulse oil change, which can effectively clean the pipeline and change the oil more thoroughly.
-Powerful recovery function, it can quickly recover used brake fluid at the same time. The air intake port has a water separating and filtering device, which can separate the moisture in the air, avoid mixing with the oil, and ensure the quality.
How to set the working pressure correctly?
-When the device is not in factory, the working pressure of the pressure regulator is adjusted to 1~1.5bar to ensure the liquid storage chamber is not deformed when changing the liquid. This ensures the tightness of the secondary sealing ring.
-In addition, it is also possible to drain or change the fluid at a lower working pressure by adjusting the pressure and size switch.
-In special circumstances, while working under a higher working pressure, be aware of the excessive pressure adjustment, which may damage the master cylinder of the braking system.
-Auto ast605 auto pulsating brake oil changer operating steps:
Note: no need to start the vehicle for operation.
1. Raise the car to a suitable height so that the drive wheels are off the ground.
2. Connect the one oil pot of the device to the car brake cylinder, and loosen the exhaust screw of the brake cylinder to ensure oil flows out.
3. Pour 2L of new brake fluid from the equipment fuel filler port and find the matching model port to connect to the master cylinder fuel filler.
4. Connect to 12v car and turn on the power button.
5. Press the vacuum switch button.
6. Press the fuel switch button to change the brake fluid.
7. During the oil changing process, look at the mouth of the car brake oil tank. If refueling is too slow, press the accelerator button on the device to accelerate refueling. If it is too fast, press the delay switch button to slow down.
8. After the oil change is completed, the used oil in the equipment tank must be drained clean. If it is not drained cleanly, the vacuum pump will be damaged and the oil change process cannot be performed.
Autool ast605 auto pulsating brake oil changer features:
1.[Built-in pressure monitoring system]: The pump for filling the brake fluid reservoir is equipped with a pressure monitoring device. You can adjust the pressure through the adjustable knob, the pressure range is 0.6-3.0 BAR. If the pressure cannot be established or the pump sucks in air, the pump will shut down automatically. Besides, the recycling bottle can be put in the machine body, which is easy to carry.
2.[Optimize advantages]: Compared with the traditional compression brake fluid bleeding device, the pulsating electric brake oil exchanger can effectively avoid the formation of bubbles when adding brake fluid. to optimize and avoid the artificial waste gas process. Autool ast605 has a powerful recovery function, which can quickly recover the used brake fluid at the same time.
3.[Widely Applicable]: Autool ast605 is suitable for European, American and Asian car brake fluid tanks, it can apply to almost all vehicles. This pulsating brake oil replacement device is applicable for brake oil standard dot3, dot4, dot 5.1.
4.[High Efficiency]: Our main bleed kit only requires one person to operate and allows you to easily use and change the brake oil. It can change oil four sub pumps at the same time, after setting the working environment, the whole replacement process is automatic, so don't worry about being too busy.
CHF
