AUTOOL CT60 Fuel Injector Signal Generator Fuel Injector Super Pulse Signal Tester Increase CT150 CT200 Pulse Pressure 110V-240V
Autool ct60 is used to test car injectors to determine if the fuel injectors are stuck, leaking or burning. It is possible to set multiple pulse outputs and set the speed, operation time and other parameters as needed. It is also possible to connect two nozzles for simultaneous operation to compare the sprayability status and spray angle of the fuel injector.
Autool ct60 fuel injector signal generator features:
① standard fuel injector type;
② high-pressure fuel injector type;
③ Wide working frequency and time range;
④ LCD display.
1. Standard fuels in nozzle type: that is, the car naturally aspirated fuels in nozzle, the DC voltage 12V can drive the solenoid valve in the fuels in nozzle.
2. Types of high-pressure fuel injectors: The turbocharged fuel injectors for automobiles, the instantaneous voltage of 75V can drive the solenoid valve in the fuel injector.
3. Wide operating frequency range: The operating frequency range can reach 600~4000RPM.
4. Working time range: The working time setting range can reach 0~99 minutes.
5. LCD display: Working frequency and time are digitized for more accurate adjustment.
[Professional Easy]
Easily solve common faults such as stuck, blocked, leaking or insufficient fuel injector combustion.
[pulse test]
Pulse width and speed can be adjusted continuously and different programs can be applied to drive the injectors.
[Excellent test results]
During the cleaning process, impulse cleaning can be achieved by adjusting the speed and width to optimize the cleaning effect.
[Wide range of applications]
Can be used with any fuel pressure tester, this device can also be used with ultrasonic cleaners and older injector testers. The GDI engine injector drive mode added to this machine can be used as an upgrade kit for the old version machine (non-GDI drive machine).
Operation Instruction:
1. Turn off the vehicle's engine and remove the injectors from the engine.
2. Connect the pulse output to the fuel injector input connector.
3, connect the positive and negative electrodes terminals to the 110V/220V power.
4. Press rpm "+"-" button to choose the required analog speed. Press "Start" button, then the device starts to work.
5. Select the required injector.
6. Put the device into the connection kit, and then press the carburetor cleaner.
7. Press the speed buttons "+" and "-", the tester outputs the pulse to the injector, and then the pulse signal indicator lights up. The device starts to work.
8. Use self-pressure washer, you need to choose the appropriate connector and connect it well. Press the start button to start spraying and observe the spray status and angle with the naked eye.
Precautions:
1.Make sure the car engine must be turned off before using this device.
2 .no smoking or light near the car.
3. Do not spill the car's fuel on hot engine parts.
4.Only operate this device in a well-ventilated place.
5 . do not approach any rotating parts of the car and do not touch any heating parts of the car.
6, do not touch car parts with dangerous voltage logo.
7 . wear qualified safety goggles.
Package list:
1pc * autool ct60 automotive injector tester main unit
1pc * Power adapter adapter
1pc * User manual
1pc * injector connector
1pc * connecting cable
1pc * power supply cable
CHF
