AUTOOL CS606 OBD2 Scanner OBDII Diagnostic Tools for 21 Sets Engine ABS SRS SAS EPB DPF Head Lamp Code Reader scan Tool
AUTOOL CS606 Car OBD2 Diagnostic Tool Feature :
-Large 7 inch TFT color display;
-Ergonomic and fashionable design with the rugged rubber grip;
-OBDII functions available;
-AUTOSCAN / AUTOVIN (Automatically identification vehicle males);
-Specific module programming base on different car makes;
-One click online upgrade,screenshot display,live data recording;
-All Diagnostic Systems for PCM (Drive System), Chassis system, BCM (Body System) and Electrical System;
-Support 3-way can bus and 2-way K-line / L-line to realize multi-protocol high-speed concurrent communication ;
-WIFI or USB connection enables the software update flexible.The USB 2.0 Type-c interface with reinforced design can be plugged in and out stably for latest software update.The communication interface supports USB / RJ45 / WLAN and other interfaces, which is flexible and easy to use.
AUTOOL CS606 ALL System Diagnosis :
PCM (Drive System)
The auto diagnostic scanner can help detect the Engine, Transmission, Transfer case, Electrical Machine Electronics, Fuel Pump, Gear, and more... including the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission.
Chassis System
The diagnostic tool can help detect the Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS and more... including diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this scanner does for you
BCM (Body System)
The diagnostic tool can help detect the SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head up Display, Wipe Control System, Roof, Seat & Door Motor system, Immobilizer, ABS ESP system, Air Condition. Electric Windows, Telephone, and more... including SRS, safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status.
Electrical System
The diagnostic tool can help detect the Centralized control system for engine and power transmission, Chassis integrated control and safety system, intelligent body electronic system, Communication and information / entertainment system.
AUTOOL CS606 Includes 21 Special Service Resets :
21 Special Service Resets for Oil Reset, EPB Reset, SAS Calibration, ABS Bleeding, Throttle Learn, TPMS, Suspension, DPF, BMS, IMMO, SRS, Ajuste Flex, Seats, Language, Tire Size, Head Lamp, Cylinder, Injector, Gear Learn, At Adapt, Win & Door
AUTOOL CS606 Diagnostic Scan Tool Includes All OBDII Code Reader
1.Read Codes
Present some diagnostic trouble codes after scanning the vehicle.
2.Clear Codes
Clear the fault codes after doing the repair according to the prompt of the scanner.
3.Data Stream
Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4.Read Live Data Stream
Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
5.I/M Readiness
Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for the inspection and maintenance testing.
6.View Freeze Frame Data
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
7.On-Board Monitor Test
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. Retrieves and displays test results emission-related powertrain components and systems.
8.O2 Sensor Test
If your engine has unexpectedly started to run poorly, and O2 Sensor Test should be performed. When testing the O2 sensors, the engine will idle normally and with reasonable stability. This must be achieved by loading the original base map or a known good base map and clearing all learned conditions. After reloading the base map and clearing all learned conditions, if the engine does not idle reasonably well, the probability is VERY HIGH that there is a mechanical or electrical issue on the motorcycle causing the problem.
9.Read Vehicle Information
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10.Active Test
Certain vehicle components can be actuated by commands sent from the auto diagnostic scanner to test their operability
How to update AUTOOL CS606 online ?
AUTOOL CS606 provides two ways software update: via WIFI connection mode and via USB connection mode.
Via WIFI connection mode :
1.Searching WIFI signal after selecting WIFI icon
2.The system will list all HOTSPOT on site
3.Input the password if necessary
4.Connect the Server according to the screen instruction
5.Select the car makes of the diagnostic software package according to the demands
Via USB connection mode :
1.Go to the AUTOOL official website www.autooltech.com
2.Download AUTOOL Update Client to your PC according to the instructions. Make sure the update client has been installed in your PC (Windows 7/8/10 only)
3.Connect the PC to AUTOOL CS606 main unit with the USB cable
4.Input the necessary information during the first registration
5.Select the car makes and click Download according to the demands
6.Wait several minutes, update will be done, enjoy new software
Package includes :
1 * AUTOOL CS606 main unit
1 * USB Cable
1 * Diagnostic Cable
5 * Adapters
1 * User's manual
1 * Carrying bag
1 * Carton Box
CHF
