Thank you for purchasing ZENIKO product
The ZF04 mini flash has a really small size, making it easier to carry without adding weight to your camera.
The power can be adjusted as you like, built-in lithium battery and single contact hot shoe are designed to adapt to different camera models
Just plug it in to enjoy synchronous triggering and other functions, so you can easily start flashing and experience photography.
New fun.
Describe
Switch/Test Flash Button
Power on: Long press this button, the indicator light will light up, indicating that the power on is successful.
Test Flash: After turning on the device, you can check the status of the indicator light, if the red light is on, it means the power is recharging.
Test flash: After a few seconds, the green light will light up to indicate that the energy recovery is completed (if the flash is in power saving mode at this time
Now, press this button once briefly to test the lamp flashing.
Shutdown: Press and hold this button until the indicator light goes out, indicating that the shutdown is successful.
Power selection button
After power on, press this button briefly to select between power level 1/2 or 1/1.
Indicator light ① lights up: the flash power is at 1/2 level.
Indicator light ② lights up: the flash power is at 1/1 level.
Low battery warning
When the battery charge is less than 20%, the red light will flash after the flash is triggered and the power is restored to indicate that the battery charge is low.
Power status.
Indicator light ① flashes red: in 1st/2nd gear and when the power is low
Indicator lights ①② flash red at the same time: the battery is in position 1/1 and the battery level is low.
Note: Please charge the flashlight in time when the battery is low.
Auto power off
1. The flash will automatically turn off if there is no operation for 30 minutes.
2. When the battery is low, both indicator lights will flash red for 30 seconds and then the device will automatically shut down.
USB-C charging port
Connect the power adapter while the device is turned off and check the charging progress by the indicator light.
Indicator light ① flashes red: the current battery power is less than 50%.
Indicator light ① is always red and indicator light ② flashes red: the current battery level is greater than 50% but not full
100%.
Indicator lights ①② are both solid green: fully charged.
Note: The flash cannot be turned on and used while charging.
Specification
Model: ZF04
Built-in lithium battery: 3.7V 125mAh
USB-C charging port input: 5V=0.3A(Max)
Charging time: ≈40 minutes
Flash times(1/1 gear): ≈372 times
Recycle time(1/1 gear): ≈3 seconds
Flash power level: 2 levels: 1/2 or 1/1
Color temperature: 6500K±200K
Working environment temperature: -10℃~+35℃
Sync trigger: Hot shoe
Size: ≈35mm*30mm*29mm
Net weight: ≈20g
Packing list
Flash body x1
USB charging cable x1
Storage bag x1
User manual x1
USD
EUR
GBP
CHF
