Features:
1. The transparent cylinder allows you to easily identify which part of the watch is not waterproof.
2. Designed for testing the water resistance of watch cases.
3. The air pressure can be set up to 6 ATM, meaning you can test watches with a water resistance rating of 6 ATM or higher.
4. Can test two watches simultaneously.
5. Easy to use.
Specification:
Material: Metal
Color: As shown
Pneumatic test range: 0.3–6.0 bar
Maximum test diameter: 65 mm / 2.6 inches
Maximum test height: 72 mm
External air pressure connection: 6N
Maximum cylinder pressure: 10 bar
Cylinder outer diameter: 80 mm
Cylinder inner diameter: 65 mm
Cylinder height: 138 mm
Size: approx. 24 * 14 * 27 cm / 9.5 * 5.5 * 10.6 inches
Weight: approx. 3800 g
Package list:
1 * Waterproof watch tester
Principle:
By applying pressure to the sealed box, the condition of the product being submerged dozens of meters underwater can be simulated. After the pressure is released from the sealed box, a pressure difference is created between the inside and outside of the product. Air bubbles are visually visible in the leaking product.
Instructions:
1. Pull the watch lever as far as it will go.
2. Loosen the two screws and remove the lid.
3. Draw water into the bucket until it reaches the designated red line.
4. Hang your watch on the rod.
5. Replace the lid and tighten the screws.
6. Shake the pressure lever to pressurize the watch (the official standard in the watch industry) and wait three minutes to allow air to fully circulate through the watch.
7. Push the rod down, submerge the watch in the water, press the release button down, and release the air.
8. As the pressure drops, check for bubbles. If bubbles are present, the watch seal is not working properly. Quickly pull the rod and remove the watch. If no bubbles appear, the watch seal is excellent.
Note:
Please be sure to check the product's airtightness upon arrival. To inflate the watch, use the rocker switch to increase the internal air pressure. Wait half a minute to check if the barometer reading has changed. If it hasn't, the product has a good airtight seal. If the reading does change, remove the four screws from the base, check that the gas line is turned off, and reconnect the gas line to test the airtightness again.
Package Contents:
1 * Watch Waterproof Tester
USD
EUR
GBP
CHF
