Turn on the device.
Open the rubber cover, insert the SIM card (chip facing up) into the slot, and the device will start automatically.
The indicator light will light up when the SIM card is inserted.
The device will receive a GPS position when a GPS signal is present and a GPS position when there is no GPS signal.
The device will automatically turn off when the SIM card is removed.
SMS Tracking
1. Call the SIM card phone number in the tracker to receive a Google Maps link to the location.
Or send the message "g123456#" to the SIM card phone number in the tracker.
E.g.:
2. Admin number setting (after the admin number setting, all SMS operations on the device are only possible using this number.)
Command: admin123456 phone number (this phone number is your own mobile phone number, not the SIM card number in the tracker.)
Reply admin ok
E.g. admin123456 13265790180
When the device is in an overspeed alarm, shock sensor alarm, or low battery alarm, it sends a notification to the admin number. (13265790180)
Cancel admin number:
Command noadmin123456
Reply noadmin ok
3. Overspeed alarm setting (only works in continuous positioning mode.)
Overspeed alarm setting:
Command speed123456 070 (Assume the speed is 70 km/h)
Reply speed ok
E.g
When the device speed is over 70 km/h, it sends the message "Speed alarm!" to the admin number every 5 minutes.
Overspeed alarm suppression
Command nospeed123456
Reply nospeed ok
4. Shake alarm setting
Command shock123456
Message Response shock ok
E.g
Note: Please keep the tracker stationary for 5 minutes for this function to work.
The tracker will send an SMS "Sensor alarm!" to the admin number when the device is shocked.
Shake alarm cancellation:
Command noshock123456
Response noshock ok
4.5. Setting the device's working mode
Sleep by time mode setting
Command sleep123456 time
Reply sleep time OK
E.g
(Tracker only works for 5 minutes after waking up and returns to sleep mode, GPS turns off, GSM operates in low-power mode. SMS command, calling tracker can wake the tracker.)
Sleep by shock sensor mode setting: (Factory default is "Sleep by shock mode")
Command sleep123456 shock
Reply sleep shock OK
E.g
(No shock for 5 minutes, the tracker operates in "Sleep by shock" mode, GPS turns off, GSM operates in low-power mode. Vibration, SMS, and call can wake the tracker.)
4.6 Terminal (local) time setting (factory default gmt 0)
Command: timezone123456 local time zone rep: Time OK!
E.g.: timezone123456 1 timezone123456 0
4.7 Hardware reset
Command: begin123456
Response: begin ok
USD
EUR
GBP
CHF
