Raizi GRABO Electric Vacuum Suction Cup for Granite Glass Tile Wood Dry-Wall Fast Shipping Heavy Plate Lifting Portable Lifter
Pressure to vertical lifting force conversion
For a more accurate estimate, check the pressure gauge on your Grabo and use the table below to convert pressure values to maximum lifting force values. (Parallel holding force values can be calculated using the p/p ratio provided above for various materials.
Grabo security
-The Grabo is not designed or intended for climbing or belaying people. Using this product for climbing or any other unintended purpose may result in injury or death. grabo
-If the sealing force of the Grabo noticeably decreases while the battery is fully charged, check the rubber foam seal for wear or damage. Do not try to lift anything
Grabo until you replace the seal.
1. Slide the power switch to the left, to the on position, to supply power on the Grabo. The power indicator under the circuit breakers lights up to show you the amount of charge available. The power indicator flashes when the battery is low and needs to be charged before the Grabo can be used.
Caution: Using the Grabo while the battery is low may cause injury and damage to the materials being lifted.
2. Position the Grabo Flush against the surface of the item you want to lift.
3. Press the green button to turn on the motor and create a seal on the surface of the item you want to lift. The seal is created within a second.
-When lifting smooth materials such as glass, smooth tiles, and marble, you can press the green button again to turn off the motor once the seal is created, and the suction will stay for a maximum of one hour.
-When lifting slightly porous materials such as wood, timber, drywall, concrete or cardboard, ensure the Grabo motor
4. When finished, press the red button to break the seal and release the item.
Specification:
Battery: 14.8VDC 2600mAh Li-ion
Rated power: 16w
Charger input voltage: 100-240vac 50/60hz
Battery charging time: ~2hrs
Non-stop running time (full charge): 1.5 hours
Run cycles (when fully charged): 900 on-off cycles of 10 seconds
Stand-by mode (charge level): 30 days
Pump life: 100,000 on-off cycles/800 hours continuously
Nominal airflow: 0.7 cfm (20 l/min)
USD
EUR
GBP
CHF
