Maximum PV input power:720W(12V battery); 1440W(24V battery); 2160W(36V battery); 2880W(48V battery)
Maximum solar input (Voc):15-25V(12V battery); 30-50V(24V battery); 45-75V(36V battery); 60-100V(48V battery)
Charge current: 60-100A
Battery voltage: 12V/24V/36V/48V automatically
Controller parameters:
*The controller will discharge even under undervoltage protection.Touch hold"▼"" for 5 seconds, the discharge will continue to output.But the discharge will only be stopped by hand.Note that this power may damage the battery. Be careful with it!
*Test mode: It is the same as light and time delay control mode, but only loses ten minutes time delay.
*Timing control mode: It opens or closes discharge regularly.
*Manual control mode: It uses ""▼" to discharge or not."
*Universal control mode: Under no-fault condition, it always keeps discharge.
*Light and time delay control mode: When the controller detects nights, it delays ten minutes, then starts discharging and countdown. When the timer stops at zero, the discharge stops. The longest delay period is 23:59.
*Light control mode: When the controller detects nights, it delays ten minutes, then starts discharging. When it detects daytime, it delays ten minutes, then stops discharging.
*Charge mode: Never discharge in any case.
【7 kinds of working mode selection】
*with backlight display
*Some of the controller parameters can be changed by the user to set and save.
*Controller parameters display (working mode, battery voltage, PV charging current, battery discharging current, product working temperature, delay time);
*7 kinds of working mode selection
*Over temperature protection
*Over current protection
*Over voltage protection
*12V/24V/36V/48V automatic identification
*Dual USB 5V charging ports
*Compatible with Seal, GEL, Flooded and LifePO4 battery charging
*The LCD is designed to dynamically display the device's working data and working status.
*Advanced MPPT maximum power point tracking technology, tracking efficiency is not less than 99.5%.
Feature:
The solar charge controller with the most advanced MPPT control algorithm and the maximum power point of the PV array can be quickly tracked in any environment, so that it can obtain the maximum energy from the solar panel and greatly improve the energy utilization in the solar system.It can be used in communication base stations, home power supply systems, traffic lights, solar street lights, indoor lamp systems, etc.
USD
EUR
GBP
CHF
