Model: NF-8506
Cable mode: Digital mode/Analog mode
Transmitter
1. Cable continuity test: Remote & switch
2. Cable length test: Range: 5 〜 200m (± 3m)
3. Port flash: 10m/100m/1000m
4. POE: Mid-span/End-span/AT-4 pairs/POE voltage test
5. Link speed: 10m/100m/1000m/Duplex mode (Full duplex/Half duplex)
6. Battery: 3.7V lithium battery
7. Function: Ping scan/IP scan function
8. Transmitter dimensions: 150 × 75 × 35mm
Receiver
1. LED light
2. Earpiece
3. Battery: 3.7V lithium battery
4. Receiver dimensions: 200 × 50 × 33mm
1. Cable continuity test
2. Modes: Remote control and switch.
3. Remote: Can test cable continuity, cross/short circuit conditions.
4. Switch: Can only test cable continuity.
5. Receiver: If the scan signal indicator remains lit, it means the receiver is in digital mode. If the scan signal indicator flashes, it means the receiver is in analog mode.
6. Two modes: digital mode/analog mode, customers can use the up/down buttons to switch.
7. Digital mode: Anti-interference; when tracing cables with loads of 1000m, customers are advised to use this mode.
8. Analog mode: When there is little noise, customers are advised to use this mode.
9. Digital mode: When tracing cables without load.
10. Transmitter: Default setting is digital mode. Use the Up/Down buttons to switch between the two modes.
11. Ping Test: Customers are recommended to set IPv4 for the first time to use the ping test function. After entering the ping test function, customers can use the Up/Down buttons to select "Set IP" to set the local IP, subnet mask, and gateway. Customers must save the settings and can then return to use the ping scan functions.
12. IP Scan: Use the Up/Down button to select "Set IP" to set the local IP, subnet mask, and gateway after setting them. Customers must save the settings and can then return to use the IP scan functions.
13. Switch Test: After testing, the test result displays the switch default (10m/100m/1000m) and the switch duplex mode.
14. PS: After testing, customers must repeat the entire steps for new port tests to ensure test accuracy.
15. Settings: Customers can set language, backlight, time, auto-default, etc.
Packing List
Transmitter: 1 pc
Tool Bag: 1 pc
Receiver: 1 pc
Packing Box: 1 pc
User Manual: 1 pc
Charging cable: 1 pc
USD
EUR
GBP
CHF
