Product Features：
11 modes of stereo input
One-button shuttle or remote
Color/Brightnes/Speed/Gain/Band
adjustment
size：480*58*48 mm(L*W*T)
Weight：1000g
64 LEDs / Channel
Low, medium, and high band filtering
Electrical Characteristics：
Voltage：AC100-240V
Maximum current：0.5A
Frequency response：50Hz-18KHz
Pickup sensitivity：>-40dB (@1KHz)
Input impedance：20k
Instructions：
PowerOn——
After the AC socket on the back is
plugged in, press the power switch next to it. If it was turned off by
remote control last time, it needs to be turned on by remote control
once;
Power Off——
The power switch on the back can
completely shut down the deviceThe power button of the remote control
can enter the standby mode, and press it again to start the machine
immediately;
Adjustment parameters——
1.Short press the knob to enter the display menu options, select mode, color, brightness, speed, and frequency band;
2.Rotate the knob to adjust the value.
The upper LED segments the total number of values, while the lower LED
displays the effect;
3.Double-click the knob to close the menu immediately, or you can wait 10 seconds for the menu to close automatically；
4.Turn the knob to adjust the gain (digital mode) when the option is not displayed;option
MODE——Display mode selection：
1：Ordinary music level；
2：On the basis of mode 0, add a peak at the top, and decrease after a delay；
3：Similar to 1, but the peak moves away from the bottom direction；
4：Flowing light, x-axis represents time, color represents amplitude；
5：Similar to 0，From both sides to the middle；
6：As above，with the peak；
7：Similar to 5，Middle to both sides；
8：As above，with the peak；
9：All lights turn on together, with a brightness of amplitude. The higher the amplitude, the brighter the lights；
10：Opposite to the above；
11：All lights turn on together, and the color changes with amplitude；
COLOR——19 colors available；
DIMMER——Brightness ,6 levels of brightness from bright to dark;
SPEED——Speed setting, five levels of speed, from slow to fast；
BAND——Frequency
band settings; The sequence is: full frequency range, low frequency
(50-300Hz), intermediate frequency (300-2kHz), high frequency (2k-18kHz)
About Gain Adjustment:
This device has two adjustable gains:
1. The fine-tuning potentiometer on the
back of the device can independently adjust the input attenuation for
the two audio channels, belonging to analog input attenuation
adjustment;
2. During normal display, the knob can
adjust the magnification inside the device, and the two channels can be
adjusted synchronously, with a range of 0-32, belonging to digital
adjustment；
Adjustment method：
Using line input, first turn the panel
knob to the left for more than 2 laps, then turn it to the right for
half a turn. At this point, the gain is approximately 6-8. Adjust the
knob on the back until the display dynamic range is satisfactory.The
back knob is factory default at the center.
Notice：
1.Do not connect to a power supply
higher than 240v, otherwise the board may be damaged, please use the
power cord certified by the relevant agency；
2.Do not immerse in water, or use under the condition of humidity higher than 90%
3.Do not use any solvents or liquids to wipe the screen except absolute alcohol；
4.Do not disassemble b
USD
EUR
GBP
CHF
