Features:
100% brand new and high quality.
Item type: digital tire pressure gauge
Application: Car, Van, Bus, Truck, Motorcycle, Bicycle, etc.
Display: LCD
Backlight: yes
Unit: psi, bar, kpa, kg/cm2
Function: Inflation, deflation, pressure gauge, pressure monitoring
Power supply: 2x AAA batteries (included)
Operating temperature: -20 °C ~ 65 °C
Pressure range: 0-255psi/0-18bar/0-18 Kg/cm2/0-1800kpa
Precision: ± 0.3 psi/0.02 bar (temperature in 20-30 ℃)
Resolution ratio: 0.1 psi/0.01 bar/0.01 kg/cm2/1kpa
Meterial: Nylon, rubber, metal
Hose length: approx. 600mm (without inflator)
Size: as pictures show
Weight: Approx. 510g
Operation:
Air inlet (g) of tire pressure gauge is connected to air source such as air compressor. (Only measured pressure when without air source),
Twist the nozzle cap of tire valve.
Insert the inflatable clip nozzle (h) vertically into the tire valve nozzle and make sure there is no air leakage.
Press the left button (c) to start the machine, and press the right button (d) to switch the device to bar after the machine starts. After adjustment, it will automatically save for next use.(When the tire is connected, it will automatically turn on when the pressure is detected and display the actual tire pressure.)
If the tire pressure is too low, press the handle (f) to inflate, and if it is too high, press the outlet valve (e) to deflate.
When the screen shows the air pressure valueInflated Needs Done, remove inflatable clip nozzle (h). Do not use automatic shutdown after 30 seconds or press the left button to shut down.
Problems and solutions:
If the air compressor contains too much water or the temperature difference in the use environment is large, the tire pressure gauge may appear negative pressure and cannot be shut down. Remove the battery and reinstall it to restore the default setting.
The backlight is dark and the display is not clear. Please note whether the battery power symbol is at low voltage and replace the battery in time (No. 7 battery is used in the product).
Inflation is slow and air is not filled. Check whether the pressure of the air compressor is too low or the clamp does not fully open the valve core.
Note:
The product cannot be inflated directly, which needs to be connected to air compressor and other air source equipment.
The product is powered by 2x7 AAA batteries.
To install or replace the battery, open the soft adhesive case to see the battery compartment.
If the two buttons cannot be pressed at the same time, the calibration mode is entered. Remove the battery and reinstall it.
The backlight will turn off automatically within 15 seconds. To turn it back on, press the power button.
Convert by unit and select the desired unit. After the selected unit is shut down, it will be saved as the default unit.
Package included:
1 x Tire pressure gauge
1 x Rubber hose
1 x Manual
USD
EUR
GBP
CHF
