Features:
Long standby time, continuous metering for 26 hours.
High accuracy, 0.1~100,000 Lux.
32-bit MCU with high accuracy sensing.
Support reflection metering, incident metering.
Support multiple charge-ports.
Parameter storage function.
Adjustable reflectivity.
Specifications:
Metering angle: 45° integral metering (default reflected light, can also be adjusted to incident light)
Display: 0.96 inch 0LED
Battery: 3.7V, 300mAh
Aperture range: F1.0~F64
Shutter range: 30S~1/8000S
Working current: 8mA~10mA
Standby current: 3.5μA
Reflected EV range: -2.0~19.0
Incident EV range: -4.5~15.5
Exposure compensation range: -5.0~+5.0
Three elements of exposure (gear description):
Aperture F, the range of gear can be adjusted as follows:
F/1.0, 1.2, 1.4, 1.8, 2.0, 2.5, 2.8, 3.2, 3.6, 4.0, 4.5, 5.0, 5.6, 6.3, 6.7, 7.1, 8.0, 9.0, 9.5, 10, 11, 13, 14, 16, 18, 19, 20, 22, 25, 29, 32, 45, 64
Shutter T, the range of gears can be adjusted as follows:
30s, 15, 8, 4, 3, 2, 1.6, 1.3, 1, 1/2, 1/3, 1/4, 1/5, 1/6, 1/8, 1/10, 1/13, 1/15, 1/20, 1/25, 1/30, 1/40, 1/50,1 /60, 1/80, 1/100, 1/125, 1/160, 1/200, 1/250,1 /320, 1/400, 1/500, 1/640, 1/800, 1/1000, 1/1250, 1/1600, 1/2000, 1/4000, 1/8000s
Sensitivity IS0, the range of gears can be adjusted as follows:
6, 8, 10, 12, 16, 20, 25, 32, 40, 50, 64, 80, 100, 125, 160, 200, 250, 320, 400, 500, 640, 800, 1000, 1600, 3200, 6400, 8000
Package size: 180 * 130 * 60mm / 7.1 * 5.1 * 2.4in
Package weight: 300g / 10.6oz
Instructions:
1. After receiving the goods, it is recommended to fully c-harge before use
2. Metering: continuous metering starts when it is turned on, and stops metering when turned off.
3. The operation dial on the rear right side of the machine has three operation modes, press forward, press backward, and press inward (leftward).
4. Selection of priority mode: operate the dial to go in (leftward) and press to change the priority mode.
5. When the screen arrow points to the aperture value, it shows the aperture priority mode. Press the dial forward or backward to increase or decrease the value. Long press the dial forward or backward to quickly adjust the value.
6. The flash arrow on the points to the shutter time, indicating the shutter priority mode, the same dial can adjust the value.
7. Long press the dial in (left) for more than 1 second to adjust the sensitivity. At this time, the screen flash arrow points to ISO. Press again to exit the sensitivity adjustment. When the sensitivity is set, the machine can also measure light continuously.
Packing List:
1 * Light Meter
1 * Power Cable
USD
EUR
GBP
CHF
