>>>OVERVIEW
The LED-ARM2 macro arm light uses heat-free technology and consists of two LED lights specially designed to light up your close-up shots in macro photography.The cold shoe mount design allows you to easily mount it on a camera by gently sliding the code shoe into your hot shoe and then turning the locking knob clockwise to secure the installation.The dual flexible arms are made of metal and wrapped with soft silicone, which provides a comfortable hand feeling.It is adjustable to different angles to throw light where you need it, thus fitting your different lighting needs.
>>>FEATURES
1.The two flexible arms are adjustable and bend easily to throw light where you need it;
2.Max.“length of flexible arm is 11.4”/20.2mm;”
3.The LED macro arm light features heat-free technology and fast heat dissipation.
4.Three lighting modes and ten adjustable brightness levels.Allows you to adjust the brightness level of each LED light separately in dual light mode;
5.The screen displays the lighting modes;
6.It has a built-in 600mAh battery and can be charged with a USB Type-C data cable (included).
>>>CHARGING AND LIGHTING TIME
Charging time: About 2 hours
Maximum lighting time: 13 hours and 30 minutes (the lowest brightness level of dual light mode);
Minimum lighting time: 1 hour and 25 minutes (the highest brightness level in dual light mode).
>>>COMPATIBILITY
The JJC LED-ARM2 Marco Arm Light is compatible with most DSLR/mirrorless cameras with standard hot shoe. Here are some models for reference:
Canon:
EOS R, R3, R5, R6, R7, R10, RP, Ra
EOS M50, M200, M100, M6, M5, M3
EOS 1D series, 5D series, 6D series, 7D series; 90D 80D 77D 70D 60D; 850D 800D 200DII; 1500D 1300D 3000D
EOS Rebel SL1 SL2 SL3; T8i, T7i, T6, T6i, T6s, T5, T5i...
Nikon:
Z5, Z6, Z6 II, Z7, Z7 II, Z50, Z fc, Z9, Z30;
D850, D810, D780, D750, D610, D500
D7500, D7200, D5600, D5500, D5300, D3500, D3400...
Sony:
A7 series, A7R series, A7S series, A9 series, A99 series
A7C, A6600, A6500, A6400, A6300, A6100, A6000...
Fujifilm:
X100V, X100F, X100T, X100S, X100,
X-T1, X-T2, X-T3, X-T4, X-T5,X-T10, X-T20, X-T30
X-E4, X-E3, X-PRO1, X-PRO2, X-PRO3, X-S10, X-A10...
Olympus:
OM System OM-5, OM-1, OM-D E-M10 series, E-M5 series, E-M1 series...
and other DSLR/mirrorless cameras with standard hot shoe.
>>>Questions and Answers
Q1: Does this work with Sony DSLR cameras?
A1: Yes, this item fits most DSLR/mirrorless cameras with standard hot shoe.
Q2: What is the effective distance of this light?
A2: We recommend that the shooting distance does not exceed 1 meter. Within 30cm will give you the best shot.
Q3: How long does it last when fully charged?How long can it be used when fully charged?
A3: It takes about 2 hours to charge with a 5V/1A charger; If you use the lowest brightness, it can be used for about 13.5 hours; if you use the highest brightness, it can be used for about 1.5 hours.
>>>HOW TO USE
Step 1: Turn on and off
Press and hold the mode switch for about 3 seconds to turn on the LED light.
Press and hold the mode switch again for about 3 seconds to turn off the LED light.
Step 2: Mode switching
Short press the mode switch to switch the different lighting modes.
"*The LED light supports three lighting modes: "left light - right light - double light", circular play."
Step 3: Adjust the brightness
The LED light supports ten levels of brightness, adjustable in each lighting mode.
"1. Short press the brightness button "-" to decrease the brightness of the LED light.
"2. Short press the brightness button "+" to increase the brightness of the LED light."
Tip:
*The LED light will flash three times when the brightness reaches the lowest or highest level.
"*Press the mode switch three times to enter the default "Double Light" mode. Fifth level - Fifth level."
*In any lighting mode, turn off the LED light and then turn it on again. The LED light has a memory function (memory of the lighting mode and brightness level at the moment of power off).