QUICK OVERVIEW
The Creader Professional CRP129X, which is based on the classic and multifunctional diagnostic tool CRP129, was developed by technicians to fix four systems with state-of-the-art hardware / software as well as several useful functions like five reset functions in most of the large vehicles on the go today.
LAUNCH CRP129X OBD2 scan tool Android based Upgraded from CRP129, 4 system diagnostics with oil reset, EPB / SAS / TPMS and throttle service, battery voltage graghing, AutoVIN for small shops and do-it-yourselfers
The Creader Professional CRP129X, which is based on the classic and multifunctional diagnostic tool CRP129, was developed by technicians to fix four systems with state-of-the-art hardware / software as well as several useful functions like five reset functions in most of the large vehicles on the go today.
The updated version of Classic Scanner CRP129
The newly released LAUNCH scanner CRP129X is an enhanced version of CRP129 with the same four system diagnostic functions:
1. A bigger 5 inch screen;
2. Two other special services (TPMS service, gas adjustment);
3. AutoVIN technology;
4. Automatic inspection report
Four system diagnostics
1. For the engine system
The diagnostic tool can help detect engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in the engine system to improve vehicle performance, save energy and reduce exhaust emissions.
2. To transfer:
It makes a lot of sense in safe driving if your car is slipping or difficult to shift. This diagnostic scanner can find out the problems by reading codes in the transmission system or check the health status through the live data display.
3. For ABS system:
Diagnosing an ABS problem should always begin with a visual inspection of all brake components. Next, you need to get the ABS codes to see what the problem is. This scanner does this for you.
4. For the SRS system:
The SRS safety restraint system consists of impact sensors, a control module and the airbags themselves. This diagnostic device can recognize any electronic parameter in order to check its health.
Five most used services 1. Reset oil:
It is also equipped with an oil service and lamp reset mechanism, a feature that ensures the vehicle engine is kept in its rightful, healthy self.
2. SAS reset:
It helps to clear the erroneous memories of the steering angle sensor and plays an important role in the calibration of the steering angle sensor.
3. EPB service:
Reset the brake pad after repairs to the electronic parking brake system are complete. Using this system therefore makes the braking process much easier and simpler.
4. TPMS service:
Searches for the tire sensor IDs from the vehicle's control unit and performs TPMS programming and resetting operations after the tire sensors have been replaced.
5. Throttle adjustment:
Initialize the throttle actuators to the default state to fine-tune the operation of the throttle (or idle motor).
All modes of the OBDII functions for repair work
This scanner supports all 10 test modes for OBD-II vehicles, which are great for daily repair work. The following table describes the purpose of each operating mode:
01 - Request current powertrain diagnostic data
02 - Request powertrain freeze frame data
03 - Request emissions-related diagnostic trouble codes
04 - Delete / reset emission-related diagnostic information
05 - Request test results for monitoring the oxygen sensor
06 - Request on-board monitoring test results for specific monitored systems
07 - Request emissions-related diagnostic trouble codes that were detected during the current or most recently completed driving cycle
08 - Request control of the on-board system test or the component
09 - Request vehicle information
0A - Request emissions-related diagnostic trouble codes with permanent status
Battery voltage functions
In this menu, the vehicle's battery voltage can be graphically displayed in real time.
Broad coverage of mainstream global vehicle models
LAUNCH CRP129X offers wide rates of compatibility with various modes of OBD2 motor vehicles. The scanner works with pretty much any car made since 1996, as long as the car has a 16-pin OBD-II connector:
UNITED STATES:
Buick, Cadillac, Chevrolet, Dodge, Ford, GM, Chrysler, Jeep, Lincoln
Australia:
Au Ford, Holden
In addition, it is known that this diagnostic device also supports vehicles that fall into the CAN (Controller Area Network) category. In this regard, it is said to have the ability to retrieve both generic and proprietary code. Its use is therefore widespread.
If you work on different vehicles on a regular basis, this scanner is a must to consider.
AutoVIN technology
The diagnostic tool is equipped with AutoVIN technology. This means that your vehicle's VIN number is automatically read and saved with the push of a button. It instantly identifies your car and you don't have to enter your car's year, make, engine, etc.
Automatic inspection report uploaded for convenience
Certain problems can arise that you cannot understand when diagnosing a vehicle. With LAUNCH CRP129X you can save the inspection report and transfer it to the cloud server or even print the data from the PC.
Update and guarantee
Lifelong free update online.
One year warranty on quality problems.
USD
EUR
GBP
CHF
