Brazing Flux Generator Acetylene Propane Gas Flux Brazing Tank RD16-0B 2L Maximum Capacity Welding Equipment 0.05 MPa External Pressure
1. Suitable for automatic and manual brazing in general operating areas.
2. The base housing is made of carbon steel.
3. If the flux generator cannot be used normally, check for blockages in the temperature control unit and piping.
4. When filling the single-tank flux generator with liquid, the machine must be stopped before filling the material.
5. The inlet and outlet valves are made of brass ball valves.
6. Oxygen must not be allowed to enter the flux generator under any circumstances.
7. Ignite the welding torch. A neutral flame is best for the flux generator.
8. Install an air flow control valve to adjust the flux concentration.
9. Close the control valve tightly before the flux enters the tank. Wait until the flux in the tank is atomized, then open the valve to adjust the gas flow.
Name: Flux Generator
Model: RD160-B
Material: Carbon steel
Applicable welding equipment: manual brazing, automatic brazing
Applicable gases: acetylene, propane, LPG
Inlet pressure: 0.06 MPa
Outlet pressure: 0.05 MPa
Inlet connection: 5/16
Outlet connection: 5/16
Capacity: 1.5-2 l
Air flow: 2 m³/h
Wall thickness: 4 mm
Size: 200 x 170 mm
Weight: 9 kg
USD
EUR
GBP
CHF
