KW608 Multifunction Diesel Common Rail Injector Tester Piezo Injector Tester USB injector test with test function
product brief
Kw608s High Pressure Common Rail Injector Tester is a simple, powerful, portable injector tester that has 3 main functions:
1. With USB communication function, you can use computer software to control tester, and combined with other tools, it can form a powerful common rail test system, and can be upgraded through the USB.
2. Support DC 24V power supply, can be carried to the rescue, the injector can be tested on the engine, avoid cumbersome disassembly
3. In addition to using software control, kw608 also supports stand-alone working mode,
With buttons and display, can complete a variety of control settings.
Kw608 not only can test the common Electro Magnetic Injector, but also the Piezo Electric Injector,
Which can set the drive signal
1: injector type 2: working frequency 3: working pulse width 4: working mode 5: injection times
Users can make various settings according to their actual situation
product main function
1. It can drive For Bosch, For Densso, For Delphi and piezo electric common rail injector
2. support a variety of injector mode settings (vl, tl, ll, ve).
3. Support injector pulse width, frequency adjustment
4. Support counting function, you can set the number of injections
5. support ac220v/ac110v and dc24v input (can save, can be used at any time)
6. support USB communication, can use computer software operation to meet the precision adjustment control
7. Support online software upgrade (UBS2.0), according to customer demand, product function can be added.
8. Support ahe test function
The lcd menu
For bosch: injector type selection, here you can choose for bosch, fordensso, forde lphhi, forcaat, in case of inserting piezo cable, you can choose piezo
VL: Fuel injector working selection, here you can choose VE, TL, LL and so on
<: Indicates where the cursor is
Freq: frequency setting, range (electromagnetic (1-30Hz), piezoelectric (1-20Hz))
Width: pulse width adjustment, range (0-5000us)
Count: Count in positions, range: (1-6000 times, 0 means spray all the time, not counting)
The software interface is show below
1:Port selection, according to the installed drive, the port number identified by the computer, select the appropriate port number here
2: Open the port
3: Choose the fuel injector type
4: Select working mode
5: set fuels in injection frequency
6: fuel injection pulse width set
7: Set the number of injections, 0 means spray all the time
8: Turn on the injector and the injector starts to work
9: Display of the current fuels in injection times
10: systems in positions, can change the software language, view, help, etc.
Language settings:
This software supports English, French, Russian, Chinese, Spanish:
Technical parameters:
Screen: 1.4 inch 128*64 LCD display.
Input voltage: AC220V/110V or DC24V.
Operating current: typical value: <1a
Typical power consumption: <24w.
Connection mode: 4pin cable interface.
Operating temperature: 0-50℃.
Storage temperature: -20℃, ~70℃.
Relative humidity: 60%.
Product size: 210*120*50.
Host weight: 610g.
How to test on the truck?
Use the Alligator clip to connect the battery and the kw608, then started to use the kw608 to test injector
How to distinguish the piezo and electromagnetic injector?
Use the injector resistor, if the resistor > 180kΩ then it is the piezo injector
If theresistance is <10Ω then Electro Magnetic Injector
CHF
