Constant temperature heating table 946C mobile phone disassembly preheating station 200 * 200mm electric soldering station
Product specification:
Model: 946C
Input voltage: 220V
Heating area: 200mm*200mm
Heating Block Power: 800W
Temperature Control Range: 50℃-350℃
Constant temperature Stability: ±1.5-℃
Product Size: 218mm*152mm*218mm Weight: 5.4kg
Product Features:
CPU control temperature, accurate, constant. The heating ring is easy to install. Temperature settings are available in two modes: routine settings and timely setup. The temperature display is intuitive and accurate. Has the function of automatic detection sensor.
High-quality aluminum plate, high thermal efficiency, uniform temperature.
Temperature General Settings:
Long Press * Key more than 1 seconds, you can enter the temperature setting mode, and then press the * key, you can switch to set the temperature value of the number of digits, and by heating or cooling key settings.
Temperature Instant Setting:
In the heating table constant temperature state, direct heating key or cooling key, the current operating temperature can be ±50℃ adjustment.
Warning:
1, the heating table placed on the working platform, the table to be flat, the material must be heat-resistant.
2, in the process of work, plate and around very hot, to be careful to operate, beware of Burns, burns!
3, heated objects to pay attention to safety, too high temperature may damage the heating components.
4. It is prohibited to use heating plates in the vicinity of combustible and flammable objects.
5, to move or contact the machine, remember to cut off the power supply until the heating plate completely cooled to room temperature.
6, the machine for high-temperature electrothermal products, if not using the machine remember to cut off the power supply, so as to avoid dangerous and unexpected.
7, in order to prolong the life of the heating body and the machine, the use of high temperature (more than 300 ℃) for a long period of time machine, in general, the machine should not work more than eight hours in a continuous period of time.
Attention:
1. It is necessary to ensure that the ground line of the machine is well grounded.
CHF
