Product selling points:
1. The product can automatically identify and detect the current in charging and discharging direction. When charging, the color of the current is green; When discharging, the color of the current is blue.
2. The shunt and screws are made of pure copper material with good conductivity, low heat generation and low power consumption. It does not consume much battery power in standby mode.
3. Support bluetooth connection mobile phone app control, after downloading and installing app, all functions can be set through the built-in bluetooth connection.
4. The product can be set to protect over voltage, under voltage, over current, over current and external over temperature. When the value is outside the range of the protection value, the output state of the meter will be turned off (must be used with a relay) to avoid damage to electrical equipment. Protection recovery time and delay time can be set for different occasions.
5. The product adds a self-calibration function, after a long period of work, the current and capacity values can still remain accurate.
6. Ampere-hour, watt-hour and time data can be cleared during measurement without affecting the next measurement. Voltage and current values can also be fine-tuned to ensure accurate capacity.
7. The product can be updated with online firmware from your mobile phone, which increases the safety of the product's operation.
8. The product can accurately measure parameters such as voltage, current, battery capacity, power, power consumption, ambient temperature, battery life, charging time and cumulative battery capacity.
9. Applicable to a variety of batteries: lithium ternary batteries, lead-acid batteries, lithium phosphate batteries, etc., as long as the battery can be in the voltage measurement range
Parameters:
Sampling mode: Sampler
Voltage measurement range (external power supply): 0-120V
Voltage measurement range (with its own power supply): 10-120V
Voltage resolution: 0.01V
Current measurement range:
Kl110f: 0~100A
Kl140f: 0~400A
Kl160f: 0~600A
Current resolution:
Kl110f: 0.01A
Kl140f: 0.1A
Akl160f: 0.1A
Relay: Relay is not provided, you need to configure your own
Temperature measurement range: -20-120 ° Celsius
Capacity display range: 0% ~ 100
Power measurement range: 0 ~ 72kw
Power resolution: 0.01 w
Amp-hour measurement range: 0 ~ 9999.99 Ah
Capacity resolution: 0.001 ah
Watt-hour measurement range: 0 ~ 9999.99 kWh
Watt-hour resolution: 0.01 wh
Bluetooth communication distance: 10 meters maximum without obstacles
Voltage accuracy: ± 2% + 3 words
Current accuracy: ± 5% + 10 words
Sampling rate: 1 time / second
Measurement board power consumption: about 0.4 w
Over power protection: 0-99999.99 w
Negative overcurrent protection: 0 ~ 50a/100a/400a/600a
Positive overcurrent protection: 0 ~ 50a/100a/400a/600a
Overvoltage protection: 0 ~ 120V/600V
Undervoltage protection: 0-120V/600V
External overtemperature protection: 0-120 ° ℃
Package list:
Measuring module * 1
Shunt * 1
4p cable * 1
Temperature sensor * 1
3p green terminal block * 1
3p cable * 1
USD
EUR
GBP
CHF
