Product Description
Working voltage: 5V
Connection method: USB Type-C
Product size: 240mm*166mm*12.6mm Key cap size: 25.8mm
Supported platforms: pc /ps3/ps4/switch/ Android/Steam
Product specifications:1Mini keyboard,1Type-C data cable,1Keycap puller, 4 anti-slip pads
HautePad M Series
Ten years of gaming peripheral experience
Carefully crafted portable hitbox
Bring you back to the arcade
The heart of the fight never stops!
This is an all-metal hitbox keyboard with CNC aluminum alloy
Anodizing process ultra-thin, not bulky at all, compact and easy to carry, with low axis switches.With a cool appearance in RGB mode.Perfect for fighting games, it's worth having!
The Raspberry Pi RP2024 main control chip uses a low-cost combat chip
Characteristic:
Dual-core ARM Cortex-M0+ at 133MHz
Supported by a dedicated QSPI bus, up to 16MB of off-chip flash memory
Fully connected AHB crossover switch
Integrated 264kB on-chip SRAM in six independent groups
40nm process node manufacturing, low dynamic power consumption and low leakage
1ms delay, no image leakage over 95%
Supports firmware updates
More features and compatibility coming soon
01 Compatibility
B – Xinput mode (Windows/Steam)
A – SWITCH mode
X – PS3 / Dinput mode (Raspberry Pi / Android)
Y – PS4 mode (compatible with PS4 games on PS5 console)
RT – KEYBOARD mode
Input mode
To change the input mode, hold one of the buttons (as shown above) since the controller is connected.
Tips:
This product is set to Xinput mode by default. The input mode is saved through power cycles.
If there are games that are incompatible with the above input modes, you can enter the web configurator to change them for normal use.
PS4 mode
This product will be disconnected 8 minutes after connecting to the PS4/PS5 console.
You can avoid this 8 minute timeout by uploading the verification files required for PS4 mode. For more details, please visit the official website: www.haute42.com
Web Configurator
This product includes a built-in web-based configuration application that can be launched by holding START when connecting your controller to a PC. Then access http://192.168.7.1 in a web browser to begin configuration.
TURBO
Hold TURBO and then press the key you need to be set for the turbo function. Then this key will be sent continuously while you press it. To cancel this turbo key, simply repeat the privileged step.
The set turbo key will be cleaned when you turn it off.
These keys can be set as turbogen keys: A/B/X/Y/LB/RB/LT/RT
04 RGB LED Setting
●BACK+START+X Next Animation
●BACK+START+A Previous Animation
●BACK+START+Y Brightness Up
●BACK+START+B Brightness Down
●BACK+START+RB LED Parameter Up
●BACK+START+RT LED Parameter Down
●BACK+START+LB Pressed Parameter Up
●BACK+START+LT Pressed Parameter Down