Specification
Size: 80x230mm (middle body diameter: 80mm x Length: 230mm)
Speed ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.
Cooling: Water cooling
Power interface: Optional H20-4 pins waterproof air connector. The air connector marked "1", "2", "3", "4", "1", "2", "3" with the inverter (u, v, w), 4 connected inverter grounding.
Power: 2.2kW
Voltage: 220V
Current: 10A
Frequency: 0-400Hz
Speed: 0-100/24000rpm
Runout off: Less than 0.01mm
Diameter(mm): 80
Bearing type: 2x7005 p4 dt & 2x7002 p4 dt
4pcs fully sealed angular contact bearings
Colour collet: Er20
Clip knife diameter: 13mm,12mm, 12.7mm,11mm,10mm,9mm,8mm,7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm (Standard 6mm)
Water cooling er20 collet piece
Grease lubrication
Main application: Engraving for Wood, bamboo, normal PCB, PVC, PMMA, plastic, bamboo, duotone board (ABS) and etc non-metal, also can engrave on gold, silver, copper, aluminum, PB etc soft metal surface that works.
1. Our ceramic ball bearing spindle use 4pcs ceramic ball bearings.
2. Ceramic ball bearings are resistant to high temperature and low heat, normally 3-5 degrees lower than steel ball bearings during use.
3. Ceramic ball bearings have low friction, low noise and long lifespan.
4. If you want to use the spindle for aluminum, hard wood, then ceramic ball bearings better than steel ball bearings.
Power: 2.2kW
Input voltage: 220V
Input phase: 1
Input frequency: 50/60Hz
Output voltage: 220V
Output phase: 3
Output current: 10A
Output frequency: 400Hz
Control method: V/F control;
(The inverter should be set up before connecting to the spindle, it must be set to 400Hz.)
1.PID control; advanced calculating PID closed loop arithmetic. fast response speed and high suitability.
2. simple PLC function can realize 16 legs of speed and inverter control function.
3. RS485 communication can realize 16 legs of speed and inverter control function.
4. With extremely strong anti-jamming ability 。
5. Low power ratting torque 0.5HZ-150%, low speed running ability.
6. Carrier adjustable by 16KHZ. Completely silent working environment.
7. Wide voltage working range, normal operation in 3.4V-456V
8.Auto Voltage Regulation (AVR) technique, for ensuring the inverter load capability.
9. Various control technique by both synchronization and non-synchronization, realize dynamic fast starting without changing brakes.
10. With perfect fault protection and short circulate output protection ability.
11. EEAD-time compensation and auto torque slip compensation function, can realize 0.25 high orque output at low frequency Hz
12. Unique EMC desige, can minimize the inverter's pollution to energy.
13. Overall reinforcement layer for all kinds of harsh environment.
Package
1& 220v 2.2kW ER20 4 bearing water cooled spindle
1& 220V 2.2kW inverter/VFD
1& 80mm spindle clamp/bracket
1& 75w water pump & 5m water pipes
USD
EUR
GBP
CHF
