Features:
1. Adopts Direct Digital Synthesizer (DDS) technology, providing stable, precise, pure, and low-distortion signals.
2. 2.4-inch TFT color LCD with a resolution of 320*240, simultaneously displays parameters and graphs for channel 1 and channel 2.
3. Adopts magic pulse technology, low jitter (RMS) <200p.
4. The instrument uses a 14-bit high-speed D/A converter chip (5Vpp output quantization error less than 1mV), 300msa/s sampling rate, 14-bit vertical resolution.
5. Can output up to 99 groups of functions/arbitrary waveforms, including 35 groups of preset waveforms and 64 groups of user-defined waveforms. Preset waveforms: Sine, Square (duty cycle adjustable), Pulse (pulse width and cycle time can be precisely adjusted), Triangle/Ramp, CMOS (0~12V), Four Channel TTL, Exponential Rise, Exponential Fall, Noise, ECG, DC, etc.
6. Allows storage of 64 arbitrary waveform data files, each with a waveform memory depth of 8192 points * 14 bits; (the greater the waveform memory depth, the more detailed the waveform is stored, and the signal details can be reproduced with high precision.)
7. Various modulation types: AM, FM, PM, QWERTY, FSK, and PSK modulation.
8. Sweep function: It can sweep four signal properties, including frequency, amplitude, offset, and duty cycle; it has two sweep types: linear and logarithmic. 0.01 s ~ 999.99 s Sweep time; up, down, and return path descriptions.
9. VCO function (voltage control output): can be achieved via an external input signal: voltage control frequency, voltage control amplitude, voltage control offset, voltage control cycle, and PWM modulation.
10. Burst output function: Manual trigger, internal Ch2 trigger, and external trigger are available. It can output 1 ~ 1048575 pulses.
11. Counter function: It has two coupling measurement modes, including DC coupling and AC coupling. This design can solve the inaccuracy problem of AC coupling.
12. Standard dual full-function channels, corresponding to two independent generators.
13. Channel sync function: Supports waveform copying and state copying between channels.
14. Supports connecting two or more signal generators to achieve multi-channel output. A maximum of 16 channels of sync output is supported, and the phase between each channel can be adjusted.
15. Precise phase adjustment of the two channels. Precision can be 0.01°.
16. Minimum amplitude resolution can be as low as 1 mV. Amplitude range is 1 mV to 25 Vpp.
17. Duty cycle of each channel can be independently adjusted from 0.01% to 99.99%, with a setting resolution of 0.01%.
18. -12V to +12V DC offset function. Resolution: 0.001 V.
19. Function Memory: It can store 20 sets of user-defined parameters and load them at any time.
20. Communication Function: All functions can be controlled by a PC program, and the communication protocol is open for secondary development.
21. Output Short-Circuit Protection: All channels can operate for more than 60 seconds after a short circuit.
22. Provides powerful waveform editing PC software. Users can upload any waveform to this instrument after editing it with the PC program included on the user CD.
23. Adopts an ABS plastic housing with a table-type design. Uses a 240V AC power supply.
Specification:
Material: ABS
Sine wave: 0 ~ 20 MHz (20 m), 0 ~ 60 MHz (60 m), 0 ~ 100 MHz (100 m)
Sampling rate: 250 ms/s (20 m, 60 m), 300 ms/s (100 m)
Output amplitude range: 1 mV ~ 24 Vpp (20 m, 60 m), 1 mV ~ 25 Vpp (100 m)
Vertical resolution: 14 bits
Waveform length: 8192 points * 14 bits
Minimum pulse width: 20 ns
Modulation type: AM, FM, PM, FSK, FSK, PSK
Display: 2.4 inch (320*240), TFT color display
Non-volatile memory: Can store 64 user-defined memory locations Waveform storage (8k 14-bit) * 64
Power: AC 100V ~ 240V
Item size: 210*195*75mm / 8.27*7.68*2.96 inches (L * W * H)
Piece weight: 611g / 21.56 oz
Package weight: 1065g / 37.51 oz
Package size: 27*21*9.5 cm / 10.63*8.27*3.75 inches
Package list:
1 * DDS signal generator
1 * Power cable
1 * USB data cable
1 * BNC-to-BNC cable
2 * BNC clip cables
USD
EUR
GBP
CHF
