introduction
Principle of CMS70A Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin inspection technology is used in accordance with Capacitance Pulse Scanning & Recording Technology, the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate by fingers. The product is suitable for in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after sports, and it is not recommended to use the device during the process of having sports) and etc.
The most important features
Operation of the product is simple, low power consumption
SpO2 value display
Pulse rate value display, bar graph display
PI display
Pulse waveform display
Menu operation
Screen brightness can be changed
The display mode can be changed
Pulse rate sound indication, it can be turned on or off
With measurement data exceedances limits and low-voltage alarm function, the upper/lower alarm range can be adjustable
Battery capacity indicator
Low-voltage indicator: Low-voltage indicator appears before abnormal work, which is caused by low-voltage, and with alarm function
Connected with an external oximeter probe
Data storage function, and the storage data can be uploaded to computers
Real-time data can be transferred to computers
Main performance
Display Mode: TFT Screen and LED display
Screen Resolution: 320*240
SpO2 measurement range: 0% ~ 100% (the resolution is 1%)
Accuracy: 70% ~ 100%: ± 2%, Below 70% unspecified.
PR measurement range: 30bpm ~ 250bpm (the resolution is 1bpm)
Accuracy: ±2bpm or ±2% (select larger)
Measurement performance in weak filling condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (choose larger).
Resistance to surrounding light: the deviation between the value measured in the state of man-made light or indoor natural light and that of the darkroom is less than ± 1%.
Power Consumption: About 350mA
Voltage: AC 100~240V, 50/60HZ
Power supply: Built-in charging Li-Polymer
Battery working hour: after the device built-in battry finished the charge, it continuous working time is not less than 1 hour
Safety Type: II device, Type BF
Accesories
Selling in standard
A user manual
A power wire
A data line
An oximeter probe
USD
EUR
GBP
CHF
