Electric 1-inch Hydraulic Hose Crimping Machine with 8 Sets of Dies
Features:
1. Updated version of the electric hydraulic hose crimper, suitable for crimping pipes with an inner diameter of 6–25 mm (1-inch hydraulic pipe R2).
3. Equipped with 8 sets of dies, convenient for removing and installing dies.
4. Adopting special die steel material and a unique heat treatment process.
5. Limit valve, rotary positioning, and scale adjustment, high precision, used for shrinkage adjustment.
6. The hydraulic gauge displays the pressure in real time to prevent pressure overload.
Type: Electric: Hydraulic Hose Crimping Machine
Operating Mode: Electric Motor
Voltage: 220 V/50 Hz
Power: 2.2 kW
Crimping Range (Inner Diameter): 6–25 mm (1/8–1 inch).
Opening without molds: 55 mm
Maximum opening of molds: 20 mm
System pressure: 25 MPa
Number of molds: 8 sets (10 mm, 12 mm, 14 mm, 16 mm, 19 mm, 23 mm, 27 mm, 31 mm)
Dimensions: 31 x 401 x 271 mm
Net weight: 24 kg
Package weight: 62 kg
Note:
1. Please add hydraulic oil before first use.
2. The oil level should be approximately 30 mm from the tank connection (do not start the machine before adding hydraulic oil).
3. Please connect the power supply correctly.
4. Pay attention to the temperature of the oil tank and motor during use. If the temperature is too high, please stop use and wait until the temperature drops before using it again.
5. Micrometer: By adjusting the micrometer, you can adjust the machining size of the machine. The machine will stop when the size set by the micrometer is reached.
6. Keep the oil filler nut loose during use (for better air circulation). Retighten after use.
7. The UP button on the operating handle controls the closing of the mold, while the DN button controls the opening of the mold.
USD
EUR
GBP
CHF
