Features:
1. Internal Suction Structure: The high-speed homogenizer features an internal suction homogenization structure that enables efficient homogenization, emulsification, and extraction of trace organic compounds in water, lipid-soluble, and soluble organic solvents between two immiscible liquids.
2. Applications: The homogenizer can rupture cell membranes to facilitate nuclear separation and can be used at various speeds to break DNA strands or separate large molecules into smaller molecules.
3. Operating Mode: This high-speed homogenizer cannot operate continuously for more than 3 minutes. It is generally recommended to operate for 1-2 minutes followed by a 1-2 minute pause, which can be repeated several times.
4. Homogenization Function: The high-speed homogenizer features a suction homogenization function. It can efficiently homogenize two immiscible liquids and emulsify traces of organic substances in water. It also extracts soluble substances and substances soluble in organic solvents.
5. Knob Adjustment: The homogenizer's operating speed can be adjusted by turning the knob. At high speed, it can process all types of animal and plant tissues into a uniform mixture. At low speed, it can be used as a mixer.
Specification:
Item Type: Adjustable High-Speed Homogenizer
Material: ABS
Motor Speed: 22,000 RPM
Homogenizing Blade 1: 8,000-18,000 RPM
Homogenizing Blade 2: 8,000-20,000 RPM
Power: 185 W
Continuous Operating Time: 3 minutes
Application:
Direct installation and use.
Package Contents:
1 x Homogenizer
1 x User Manual
4 x Measuring Cups
2 x Stands
3 x Brackets
4 x Accessories
Note:
1. The unit should be placed on a horizontal work surface. The necessary homogenizing tool must be attached. Turn on the unit and test it first with a cup or container filled with water, ensuring the pentalobe cutting head is submerged. Turn on the power switch. Turn the speed control knob from slow to fast. If no distinct metal-on-metal rubbing noise is heard (e.g., a metal-on-metal rubbing noise), turn off the unit, loosen the 6mm support screw of the cutting unit, and randomly install the outer mounting sleeve in the designated position. Then tighten it securely. The unit should not be operated until the work is complete. If no metal-on-metal rubbing noise is heard, switch off the device, loosen the 6mm support screw of the cutting unit, and install the following:
2. Cut the plants or microorganisms to be experimented on into small pieces or slices, place them in the randomly selected glass containers, clamp them in the center of the magnetic device (heptagonally), loosen the 8mm mounting screws of the fixed motor base, slowly move the homogenizing head downwards towards the opening of the container so that it is 2-3 mm below the bottom of the container, and then tighten the 8mm screws.
3. Please note that the sheet metal structure is shipped at random.
USD
EUR
GBP
CHF
