5 pieces in stock! Order by 5:30 pm, deliver it tomorrow or come pick it up right away! Absolutely great device! specification:
Image sensors:1/3" color SONY CCD
TV system:NTSC/PAL(NTSC is standard)
Effective Pixels:728X582/728x512
Detection range (mm):3.3 x 2.6
Resolution (TV lines):420
Minimum illuminance:<0.1 Lux / F1.2
Horizontal sync. frequency:15.625 KHZ
Vertical sync. frequency:50 HZ
Video output:75 Ohm
Gamma consumption:0.45
AGC:Car
BLC:Car
Night vision:Yes
IP Rating:IP66
S/N ratio:Better than 48dB
Lens:F=1.6
Lens angle (degrees):170 (over the corner)
Power consumption (mA):85~115
Power supply (DC V):12
Operating Temperature (Deg.C):-20~+75(RH95% Max.)
Storage temperature (Deg.C):-40~+85(RH95% Max.)
Installation:
1. install the camera in the license plate area of your car
2. Adjust the camera lens to your best position.
3 Connect the power cable (red and black) to the power cables of the headlights of your car.
4 Connect the video output (yellow wire) to the monitor.
Via the TV system of the rear view camera of your car:
In general, most monitors support both NTSC and PAL TV systems. So it does not matter whether it is a PAL camera or an NTSC system.
However, if you are not sure, please check if your monitor supports both NTSC and PAL systems. If your monitor only supports NTSC or PAL system, please leave us a message within one business day after payment that the TV system needs.
Waybill:
1 * CCD car rear view camera
1 * 6 m video cable
1 * power cable
USD
EUR
GBP
CHF
