Description of the Switch Control Module for Chargers:
1) Supports only constant current power supplies/constant current chargers/special chargers, etc.
2) The charging current is controlled by adjusting the constant current source setting of the charger.
3) The charger input is equipped with positive and negative reverse polarity protection, and there is no power or indicator light if it is connected incorrectly.
4) The voltage of the constant current source must be at least 3V higher than the voltage of the battery being charged before charging can begin. If the voltage difference is too small, it can be easily limited by the cable current.
Purchase Note:
The new product model is BW-600W-DK, the latest wireless electronic programmable WiFi tester. It supports Bluetooth, Wi-Fi, and PC computer connections. The device has a built-in charging control module that allows you to charge and test your battery products.
No charger is included; you will need to provide your own charger to charge your battery!
If the voltage is 12 V, this upgrade can be tested up to 50 A!
Note: The discharge current is limited by the maximum power rating: less than 3 A at 200 V and less than 50 A at 12 V.
1.1 Battery Capacity Test
This tester is designed for discharging various batteries, including 18650 batteries, car batteries (including NiMH, NiCd, LiPo, LiFe, and Pb), and for capacity testing.
1.2 Mobile Power Test
This tester supports mobile power supply discharge and capacity testing.
1.3 Power Test
This tester supports power and aging tests of various DC power supplies.
(2):
2.1 Power supply: DC 12V/3A
2.2 Voltage range: 0–200.00 V, in 0.01 V increments
2.3 Current range: 0.010–50.00 A, in 0.01 A increments (the current is automatically adjusted according to the power limit)
2.4 Discharge method:
CC: Constant current discharge of the battery, which supports testing battery capacity or power supply current.
CP: Constant current discharge of the battery for use or testing, e.g., constant current devices.
2.5 Discharge power: 600 W
2.6 Four wires: Voltage and current channels are separate, with high test accuracy
2.7 IPS display: Voltage, current, time, capacity, power, electrical energy, etc.
2.8 PC connection: The tester can be connected to a computer via Bluetooth to access additional functions such as graphs, calibration, firmware upgrades, and test cycles.
--Product parameters--
Electrical parameters (V*A) 10V (V*A)
Main function test interface
Equipment wiring method
Supports 2-wire and 4-wire testing
Product list
1. BW-600W-DK Battery Tester (1 pc)
2. DC 12V 3A Power Supply (1 pc)
3. 10A Red and Black Alligator Clip Cable (1 set)
4. Temperature Probe (1 pc)
5. Adapter Board (1 pc)
USD
EUR
GBP
CHF
