OBD2 K+DCAN BMW Diagnostic Interface + K-Line Adapter INPA Ediabas NCS NFS
Read errors code code adjustments
INPA EDIABAS K+DCAN diagnostic interface for BMW
This interface is suitable for all BMW vehicles from 1997 - today and for all Mini models.
The interface is suitable for all BMW vehicles manufactured after 1997 .
With the interface and the appropriate software, you can read out and delete the fault memory.
With this USB diagnostic interface, you can carry out an in-depth diagnosis and coding of control units on your BMW vehicle.
Even completely new models up to the present day are partially supported.
You have access to almost all control units such as LCM DME etc. that are installed in your BMW.
Of course, this device also has the battery and ignition detection!
The interface supports the following programs:
INPA (all versions)
NPC Expert
WInKpf
Edibias
BMW GT1
ISTA
ISID / ISSS
What can you do with the individual programs?
With INPA you can read and delete errors, as well as read live data from the engine control unit, etc
With NSC Expert you can customize Car and Memorykey, as well as code individual control units
With WinKpf you can flash and update the firmware of the control units
Is the interface also suitable for beginners or not so experienced users?
You will receive detailed installation instructions and a coding introduction from us. This means that even beginners can use the interface without any problems. Please don't be afraid that you won't get it right, we guarantee you support or assistance for up to one month after receipt of the interface. Don't be afraid to use this service
What functions are available to me with this interface?
Programming / coding control units
Read out and delete error memory
Adjusting the engine map
Read live data
service reset
Reset service intervals
Engine monitoring while driving
Motortung - flashing the control unit
Code control units
and much much more....
For example, what can you code?
Here is a small excerpt, there are entire databases of coding values on the Internet
RPM display in the head-up display
Fold in the mirrors when the door is closed
Daytime running lights as dimmed high beam
One-tip window
Switch off seat belt warning
Enable/disable blinking on opening and closing
convenience flashing
Set Coming Home
Rear fog light as parking light
Switch off temperature warning at 3 degrees
Lock the door automatically from 30 km/h
and much much more....
For which vehicles is the interface suitable?
Basics for all BMW vehicles from 1994 - today, with the older BMW's it depends whether an OBD connector is installed, just look in your engine compartment.
1 Series --> E87, F01, E81
3--> E30, E36, E46, E90
5--> E34, E39, E60, E61
6--> E63, E64
7--> E32, E38, E65, E66
Z --> E85, E52
X --> E53, E83, E70
Mini--> R50, R52, E53, R56
K Line vehicles:
E36/E38 from 1997, E39, E46, E53, E60, E65
CAN BUS vehicles:
E60, E61 from 03/2007
E83 from 09/2006
E81, E87 from 03/2007
E90, E91, E92, E93 from 03/2007
E70 (new model X5)
R56 (new model MINI)
The F series like GT does not work!!!
Compatible with the following software:
Ediabas / Inpa (latest version EA-90X)
NCS Expert Tool --- Tool32 --- WinKFP --- NFS --- DIS --- SSS --- GT1
BMW from Bj. 2001 to approx. Bj. 2007 still need a K-Line adapter, this is included in the scope of delivery here !!!
BMW from Bj. 1997 to approx. Bj. 2001 still need a 20 pin adapter as well as some BMWs where both diagnostic interfaces are installed.
Just like the E39 OBD2 & OBD1 (around 20pin).
Package includs:
1x BMW INPA K + DCAN With Switch Cable
1x DVD Drive Software
1x 20 Pin to 16 Pin OBDII Diagnostic Cable
USD
EUR
GBP
CHF
