1.powerful features:
Dual R134 and HFO1234YF refrigerant recovery and charging AC machine. Autool lm708 refrigerant recovery machine combines the functions of refrigerant recovery, vacuuming, refrigerant oil loading and rinsing.
2. Double gas bottles
The machine is equipped with 2 refrigerant tanks, which saves the time of replacing tanks. The machine makes a gas identification of 120 seconds. If the wrong gas is detected as filling the tank, filling is disabled, an internal vacuum is performed and the gas concentration is displayed.
3.fully automatic operation & smart control panel
After setting the relevant parameters, the machine runs completely automatically without manual operation. This refrigerant recovery machine with a large LCD display, its operating process and data can be seen at a glance, the entire process can be done via the touch panel.
4. Built-in database
This refrigerant recovery machine has built-in data of different models and can automatically adjust the corresponding refrigerant type and charging quantity according to the vehicle model, which is very convenient.
5.Recovery rate 96%
The recovery function extracts very limited compressor oil (5 ml or less) from a/c loop, while the purge removes up to 96% compressor oil from a/c loop. Operate all fuel, electric and hybrid vehicles.
automation process
The software allows parameters to be preset, allowing the machine to carry out all tasks according to a predetermined workflow.
Built in database
This machine comes with built-in data for a variety of car models, making it easy to automatically adjust the refrigerant filling volume according to the specific car model.
7 inch intelligent control panel
Lm708 refrigerated recycling filling machine is equipped with a 7-inch color touchscreen display that provides an easy-to-use interface for improved workflow visibility and efficiency.
Independent operation of dual systems
The dual system can support both R-134a and HFO-1234yf refrigerants simultaneously with a capacity of 10 kilograms each. This feature allows the tool to service vehicles using R-134a or HFO-1234yf refrigerants.
24 Language support
Lt supports 24 languages including English, Russian, Spanish, German, Polish, Indonesian, Czech, Turkish. Croatian, Serbian, French, Swedish, Persian, Arabic, Bulgarian, Dutch, Finnish, Korean, Thai, Lithuanian, Vietnamese, Portuguese Simplified Chinese and Traditional Chinese.
Wide range of applications
It is suitable for fuel vehicles, hybrid vehicles, or new energy vehcle.
Interior architecture
Built-in compressor
Allows accurate refrigerant recovery
Built-in electronic scale
Precise weighing of the refrigerant quantity
Built-in dry filter
Ensures that the recovered refrigerant is clean and can be used again.
Refrigerant database
1. Recovers and purifies refrigerant from automobile A/C to equipment container.
2. Evacuates air and moisture from the A/C system.
3. Inject cooling oil to automobile A/C system, with volume adjusted manually or automatically.
Charge refrigerant from the appliance gas bottle to the vehicle A/C system.
4. Recovery function extracts very limited compressor oil (5ml or less) from A/C loop, while Flush removes up to 96% compressor oil from A/C loop.
5. Liquid refrigerant is charged through one service port and recovered through another port to dissolve the compressor oil in the A/C loop. The oil is then separated and released into the used oil container in the machine. The liquid flow direction is changed during the rinsing process.
6. Executes the selected functions in a fully automatic order. The machine stops automatically once all selected functions are completed.
Specifications:
Input power 110V ± 10% 60Hz
Compressor performance 3/8hp
Average gas condition refrigerant recovery speed (through charge/suction port) 0.25 kg/min
Vacuum pump capacity 60l/min, does not sparkle
Recovery rate 96%
Accuracy of the gas bottle weighing cell ± 10g
New oil bottle capacity 250ml
Waste oil bottle capacity 400ml
Max. pressure 20bar
Charging speed 2kg/min (max.)
High pressure pressure gauge range -1bar~40bar
Low pressure pressure gauge range -1bar ~ 22ba
Flush:
Optional, flush time range: 10-60 minutes.
For medium or small a/c (refrigerant volume at 500g), it is recommended to set the flushing time to 30 minutes; For large a/c (refrigerant volume at 1000g) it is recommended to set the flushing time at 60 minutes.
Packing list:
1pc * Autool LM708 main unit for automotive refrigerant recovery and filling machines
2pcs * Gas bottles
2pcs * Coolant hoses (1 red and 1 blue)
4pcs * Refrigerant quick connectors (2 for high pressure and 2 for low pressure)
1 set * 7/16 plugs
1pc * USB upgrade cable
1pc*sd card and card reader
2pcs*30a fuse
1pc*User manual
USD
EUR
GBP
CHF
