Specification
Name: Automatic Screw Counting Machine
Model: FA-590A
Application Range: Up to 20 mm
Applicable Screw: 1-5 mm
Output Speed: 2 pcs/s
Voltage: AC 110-220 V
Size: 125*180*150 mm
Net Weight: 3.3 kg
Capacity: M1-1500 PCS / M2-1000 PCS / M3-600 PCS / M4-300 PCS / M5-200 PCS
Manual Mode Setting:
1. Select Manual Mode: With the machine off, press and hold the B button. Then press the power button to turn the machine on. E000 will be displayed (manual reset mode). Press the A button to switch to E001 (automatic reset mode). Press the A button to cycle through manual and automatic modes. Finally, press the F key.
2. Fixed Number Setting: With the device powered on, press and hold the A key. The counting will begin. After the beep, release the A key. d010 will be displayed (the factory default is 10). Press the A key to continue. To add an edit, press the B key to perform the subtraction edit. After the correct setting, press the F key to confirm and exit.
Automatic Mode Setting:
1. Select Automatic Mode: With the device powered off, press and hold the B key, then press the power button to turn it on. E001 will be displayed (automatic reset mode). If it is not E001, you can press the A key to change it to E001. It is best to press the F key to confirm and save.
``` 2. Delay Setting: With the device powered on, press and hold the B button. The counting will begin. After the buzzer sounds, release the B button. FF03 will be displayed (factory setting is a 3-second delay). Press the A button to perform addition and the B button to perform subtraction. After correctly setting the value, press the F button to save and exit.
3. Fixed Number Setting: With the device powered on, press and hold the A button. The counting will begin. After the beep, release the A button to display d010 (factory default is 10). Press the A button to increment the value and the B button to perform subtraction. After correctly setting the value, press the F button to save and exit.
USD
EUR
GBP
CHF
