Autel powers can ps100 generation description:
Autel powers can ps100 is the best electrical tester for reducing diagnostic time in all electrical systems from 6 to 30 volts. After simply connecting the tool to the vehicle battery, you can:
1. Determine at a glance if a circuit is positive, negative or open without having to reconnect clips from one battery post to another.
2.Test for continuity with its built-in auxiliary ground lead.
3. Apply positive or negative battery current to the probe tip by pressing the power button to test the function of an electrical component without the use of jumper wires.
4.Test for poor ground contacts instantly without performing voltage drop tests. The tool is also short circuit protected; its internal circuit breaker trips if it is overloaded.
5. Follow and find short circuits without wasting fuses. The tool's long cable allows you to test the entire length of the vehicle without constantly searching for suitable vehicle grounds.
Autel powers can ps100 features:
Performs any type of service including power injection, measurement, ground testing, polarity tests, continuity testing and component activation
Easy-to-read avometer allows you to read voltage, current and resistance at the tip of your finger
With a flip of the power switch, you have an instant hot/ground lead for powering electrical components like fans, relays, etc.
Uses the hot lead and ground lead simultaneously to activate components right in your hand
Instantly identifies positive, negative and open circuits
Tests for poor ground contacts instantly so you can quickly follow and locate shorts without wasting circuit breakers
Built-in flashlight allows you to work in the dark
Audio tone indicator allows no-look menu scrolling once users are comfortable with assigning the menu tone
20ft (extendable) cable provides excellent accessibility for testing along the vehicle
Extremely easy to use and very reliable
Autel powers can ps100 working mode:
There are four modes to diagnose the electrical systems, which can be accessed by pressing the mode button and cycling through each system.
DC Voltage
While the tool is in this mode, contact the probe tip to a circuit, then the LCD will read the DC voltage with a resolution of 0.1 volts.
AC Voltage
While the tool is in this mode, contact the probe tip to a circuit, then the LCD will read the max. voltage, the min. voltage, frequency and duty cycle.
Resistance
While the tool is in this mode, contact the probe tip to a circuit, then the LCD will read the resistance between the tip and the auxiliary ground line.
Sound On/Off
While the tool is in this mode, simply make a quick press of the Mode button to turn the sound on or off. If you press the Mode button quickly (press and release quickly), when a short high beep is heard, it means the audio sound is on. When a short low beep is heard, the audio sound is turned off.
This feature is invaluable when working in bright areas where LED lighting alone is not enough. The audio function can be turned off when needed, such as for applications where the tool is connected to circuits for long periods of time and the audio could become annoying.
Specifications:
Display: TFT color display (160x128 dpi)
Operating temperature: 0 to 60 °C (32 to 140 °F)
External power supply: 12.0 or 24.0 V power supply via vehicle battery
Length\Width\Height: 126mm(4.96")\46.5mm(1.83")\35mm(1.38")
NW: 0.105 kg (0.23 lb), GW: 0.726 kg (1.6 lb)
Autel powerscan ps100 package including:
1 × powerscan ps100
1 × Rugged impact molded case
1 × 20ft. extension cable
1 × Probe tip
1 × Battery connector clips
1 × Cigarette lighter adapter
1 × User manual
Autel PS100 FAQ:
1. Is the powerscan probe tester computer and airbag safe?
The tool LED and LCD do not draw more than 1 milliamp of current, therefore when used as a test light or multimeter it is computer and airbag safe. However, pressing the power button is a different story. When you push the switch forward you are applying full battery current to the tip of the probe. There is a nice safety feature built into the tool. Simply connect the extra ground lead to the tool and push the power switch forward until it drives the power switch off. This will prevent power from going to the tip but you can still use the tool as a multimeter. When you are away from computer components just press the reset button and you can power back on.
2. Why do I have no power at the tip when I push the power switch forward but the red LED is on?
The power switch goes through a lot. It's one of the few things that can go wrong with the tool. The switch is a consumable that needs to be replaced occasionally. We've made it really easy to not only change it, but also buy a new switch. The switch can be snapped out and replaced in seconds. You can buy switches from your Autel authorized tool supplier. The tool with the rocker switch slots makes it easy to replace a worn switch in the field without having to send it in for repair.
USD
EUR
GBP
CHF
