Features
1. The easy-to-read AV0 meter allows you to read voltage, current, and resistance at your fingertips.
2. With the flip of the power switch, you instantly have a hot/ground lead for activating electrical components such as cooling fans, relays, etc.
3. Use the hot and ground leads simultaneously to activate components right at your fingertips.
4. Instantly identifies positive, negative, and open circuits.
5. Circuit breaker protection.
6. The built-in flashlight allows you to work in the dark.
7. The 20-foot (retractable) cable provides excellent accessibility for checking along the vehicle's perimeter.
8. Extremely easy to use and highly reliable.
9. The PB100 PowerScan Circuit Tester for diagnosing electrical systems is used as a power probe for testing vehicle electrical circuits.
Product Features:
- DC voltage range: 0-65 V; resistance range: 0-100 kΩ; rated current: 1-10 amps; sound frequency response: 0 Hz to 10 kHz.
- Perform current injection, measurement, ground check, polarity check, continuity check, and component activation.
- Ergonomic design with a waterproof, rugged, blow-molded case for easy handling and storage.
- Four modes for diagnosing electrical systems (DC voltage, AC voltage, resistance, diode).
- AC RMS, AC peak-to-peak, frequency, and pulse width for signal testing.
- High voltage capability: Displays up to 60 volts with a resolution of 0.1 volts.
- 8-amp circuit breaker, automatic reset, no button to press.
- Three additional modes: MIN/MAX/audible monitoring.
- Automatically detects positive, negative, and open circuits.
- Large color LCD display with easy-to-navigate user menu.
- Comes with an additional 20-foot extension cord.
- Find shorts to ground and voltage.
Ancel PB100 Features
1. Find shorts: In most cases, a short circuit occurs as a blown fuse or a tripped electrical device. Use the probe tip to activate and energize each of the fuse contacts. The contact that trips the circuit breaker is the short.
2. Find bad ground: Test the thinned ground wire or contact with the probe tip. If the circuit breaker is open, this circuit is more than likely a good ground.
3. Trailer Testing: With the tool in DC mode, attach the auxiliary ground wire to the trailer floor, test the contacts on the jack, and then apply voltage to the probe tip. This allows you to check the function and alignment of the plug and trailer lights.
4. Continuity Testing: With the tool in Resistance mode, the probe tip can be used to test continuity on wires and components connected or disconnected from the vehicle's electrical system using the chassis ground or auxiliary ground wire.
5. Component Activation: The component activation function is used to generate activation signals for the components being tested, such as activating lights, motors, and other on-board electrical devices.
6. Signal Circuit Test: Once you remove a DTC from the vehicle and determine that troubleshooting begins with some kind of sensor circuit, a quick check is performed to verify the code. Testing your sensor is easy when using the tool.
7. Voltage and Polarity Tests: With the tool in DC voltage mode, contact the probe tip with a positive circuit. If you contact an open circuit, neither LED will illuminate.
Functions of the PB100 Circuit Tester:
1. [Perform these functions] : Power injection, measurement, ground test, polarity check, continuity test, and component activation.
2. [Multimeter]: Easily read the AVO meter, voltage, current, and resistance.
3. [Power up electrical components]: Lightly press the power button and receive instant heating compound to power electrical components such as the cooling fan, relay, etc.
4. [Activate components]: Using the hot wire and ground wire simultaneously.
5. [Check positive and negative]: Quickly determine positive, negative, and open circuits.
6. [Check short circuit locations]: Quickly check for poor ground contacts, follow, and locate short circuits without wasting the fuse.
7. [Diode Check]: Quickly check the continuity of the power switch, relay, and diode.
8. [Overload Protect]: Protect the tool from overload caused by the internal circuit breaker.
9. [With LED Light]: Allows working in dark areas using the built-in spotlight.
10. [With Extension Cable]: Operate the tool without looking at the menu once users are familiar with the sound. Check along the vehicle via the long cable.
Ancel PB100 Specifications:
1. The ultimate in circuit testing.
2. The PB100 power tester offers the ability to supply power or ground with an indicator tone and bright white LED spotlights.
3. Features a digital voltmeter, min/max, audible circuit monitoring, a standard 4mm banana jack, and an additional ground for component testing.
4. Includes case and extension cable for 12-volt power adapter.
5. External power supply: 12.0 or 24.0 V power supply via vehicle battery.
6. Display: TFT color display (160 x 128 dpi).
7. Operating temperature: 0 to 60°C (32 to 140°F).
Package includes:
1 × Ancel PB100 PowerScan main unit
1 × Rugged blow-molded case
1 × 20-foot extension cable
1 × Probe
1 × Battery terminal clips
1 × Cigarette lighter adapter
1 × User manual
USD
EUR
GBP
CHF



