The amplifier that fits perfectly on your pedalboard thanks to its stereo microphone enclosure simulation, stereo effects loop, tube-like power amp stage, and a fully featured clean preamp based on three classic amplifiers.
Power consumption: 50mA to 100mA (when using the headphone output); Supply voltage: 9V - 12V
Polarity: Center negative
Input impedance: 1 MΩ; TRS output impedance: 100 Ω; DI output impedance: 120 Ω
Output impedance: 100 Ω; Input impedance: 1 MΩ Headphone output: 120 mW at 32 ohms
FX Send:
Please note that when using FX loops, some effects allow you to choose between line and microphone levels.
This may cause unwanted clipping returning from the FX loop. If your device does not have a dedicated gain control, please be careful.
First, set the desired gain in the preamp section, and then adjust the volume.
FX Return Right (Mono): Connect the right (mono) output of your stereo effect here.
FX Return Left: Connect the left side of your effects here. If this input is not connected,
the left side will receive the signal from the FX Return Right (Mono) side.
TRS Right (Mono) Output: Transmits the right output or input signal (bypass), if selected.
TRS Left: Transmits the left output or input signal (bypass), if enabled. If the left side is disconnected and not in bypass mode, the right side adds both outputs.
DI Right: Transmits the right output as a balanced signal.
DI Left: Transmits the left output as a balanced signal.
Aux In: The aux input receives a signal from an MP3 player, phone, or any audio device and sends the signal in stereo to the headphone output. Perfect for monitoring or late-night practice sessions.
Specifications
Color: Dark Blue
Material: Metal
Package Contents:
1 * Guitar Pedal
Only the above package contents are included; other products are not included.
Note: Light reflection and different screens may cause the color of the item in the picture to be slightly different from the actual color. The permissible measurement error is +/- 1-3 cm.
USD
EUR
GBP
CHF
