Features:
True 4-wire AC sinusoidal measurements effectively eliminate the effects of test leads and contact resistance.
Two functional interfaces, battery sorting function.
Built-in rechargeable battery, phone charger compatible, low power consumption + multiple power-saving options.
Test range up to 200 ohms with a minimum resolution of 0.01 milliohms and less than 5 milliohms.
True four-wire 1 kHz AC internal resistance meter with sinusoidal battery, range 0.00001 ohms–200 ohms.
It can measure sanitary acid, lithium-ion, lithium polymer, lithium iron phosphate, alkaline, nickel-hydrogen, nickel-cadmium, button cell batteries, etc.
Specifications:
Material: ABS
Color: Black
Battery: 1 * Lithium battery, 2000 mAh (included)
Accuracy format: ±([accuracy percentage]+[significant digit])
Range: 20 mΩ/200 mΩ/2 Ω/20 Ω/200 Ω
Maximum resolution: 0.01 mΩ/0.1 mΩ/1 mΩ/10 mΩ/0.1 Ω
Accuracy: 0.7%+7/0.5%+5/0.5%+5/0.5%+5/0.6%+5
Display mode: 22.00 mΩ (when ZR function is enabled)/220.0 mΩ/2200 Ω/22.00 Ω/220.0 Ω
Within the range The accuracy can be greater than the specified accuracy of 5–95% of the gear's diameter. If the gear's diameter falls outside this range (less than 5% or more than 95%), the error may exceed the accuracy specified above.
The accuracy can be greater than the specified accuracy. Voltage measurement: ±(% measured value +% range)
Range: 1V/10V/100V
Maximum resolution: 0.00001 V/0.0001 V/0.001 V
Accuracy: 0.15 + 0.015/0.15 + 0.010/0.15 + 0.015
Display mode: 0.99999 V/9.9999 V/99.999 V
Positive and negative symmetry error: ±(0.012% + 5 pts)
Temperature drift within normal operating temperature (10°C-40°C): 100 ppm/°C
Maximum voltage between any terminals: 100 V
Display: Internal resistance figures: 2000 counts; Voltage figures: 99999 counts; Updated 4 times per Second
Temperature: Operating: 10℃-40℃, Storage: -20℃-60℃ Internal resistance temperature coefficient: 0.1 * (predefined accuracy)/℃ (<18℃ or >28℃)
Current consumption:
<60 mA (range 200 mΩ and above; backlight is off when the power supply is 3.7 V)
<120 mA (range 20 mΩ; backlight is off when the power supply is 3.7 V)
<10 mA (switch to low current mode)
0 mA (power off)
Package size: 120 x 60 x 40 mm
Package weight: 320 g
Note:
The 1035+ battery detector is a device for detecting the status of batteries. To ensure safety and accuracy, the following points must be observed during use:
1. Applicable Battery Type:
2. Before using the 1035+ battery detector, ensure you understand the battery type for which the device is designed. Different detector models may support different battery types and sizes. Ensure the detector is compatible with the battery being tested.
3. Connect the Battery Correctly:
4. Ensure the batteries are correctly connected to the detector before conducting tests. Follow the connection instructions provided by the manufacturer to avoid problems caused by incorrect connections.
5. Environmental Safety:
6. When using the 1035+ battery detector, ensure the work environment is well-ventilated. Avoid operating in humid or flammable environments to minimize potential safety risks during battery testing.
7. Read the operating instructions carefully:
8. When using the 1035+ battery tester for the first time, read the operating instructions provided by the manufacturer in detail. Understand the meaning of the device's various functions, buttons, and indicators to ensure proper operation and correct interpretation of the test results.
9. Calibrate and maintain regularly:
10. Calibrate the 1035+ battery tester regularly to ensure the accuracy of the test results. Also, keep the device clean and well-maintained to prevent dust or dirt from affecting the test performance.
Please note that the above are general precautions, and specific usage and maintenance guidelines may vary depending on the model and manufacturer of the 030 battery tester. Always read and follow the operating instructions and safety instructions provided by the manufacturer in detail before using the device.
YR1035+ Set Package Contents:
1 * Tester
1 * Pair of Probes
USD
EUR
GBP
CHF
