Characteristics:
1. 3-in-1 design with IPS display: This product ingeniously integrates digital oscilloscope, multimeter and signal generator functions in one device. 3.2 inch IPS display with clear resolution, high sensitivity full screen display, channel 2 waveforms can be adjusted to green/cyan/purple.
2. Signal Generator: Built-in waveform signal generator, which can output sine, square, triangle waves, etc. The voltage amplitude is 2.5V, the frequency is adjustable from 0?2MHz and the square wave duty ratio is adjustable from 1% to 99%.
3. High precision multimeter: Built-in true RMS multimeter that supports quick software calibration. With DC/AC voltage, DC/AC current, resistance, capacitance, diode and continuity test.
4. Digital oscilloscope function: Dual channel oscilloscope function with 120MHz bandwidth and 250MSa/s sampling rate. With perfect trigger function (automatic, single, normal). Supports sensitivity and time base adjustment, automatic mode adjustment, 2-channel waveform analysis, cursor measurement, reference waveforms, FFT spectrum, reference waveforms, waveform saving and display.
5. Dual Channel: With dual channel mode, which can measure and display two signal waveforms at the same time to compare and analyze waveforms.
6. XY mode for cursor measurement: XY mode is an imaging created by combining the waveforms of two channels and is commonly used to display the phase difference or frequency relationship between two signals.
Specifications:
Name: 3in1 Digital Oscilloscope
Material: ABS
Display: 3.2 inch IPS color screen
Battery: 1*built-in 2500mAh rechargeable lithium battery (included)
Charging: TYPE-C 5V
Language: Chinese/English
Oscilloscope:
Real-time sampling rate: 200 Msps
Analog bandwidth: 120 MHz (CH1 only); 60MHz (CH1+CH2)
Equivalent sampling: 500 million
Rise time: < 3ns
Memory: 128KB
Peak voltage: ±40V (1x), ±400V (10x)
Trigger mode: Auto/Normal/Single
Trigger Type: Rise/Fall
Display mode: YT /XY/Roll
Persistence: none/1s
Auto mode: OneKey Auto/Full Auto
Sensitivity: X1: 10mV/div ~ 10V/div; X10: 100mV/pc ~ 100V/pc
Units of measurement: 14 types
DC offset: ±2%
XY mode: yes
Screenshot: yes
Frequency: ±0.01%
Zoom mode: yes
FFT: yes
Generator shafts: sin/square/triangular
Generator voltage: 2.5V ± 0.05
Generator frequency: 1Hz-2MHz
Multimeter:
DC voltage: 600mV/6.00V/60.0V/600V/750V, ±(0.5%+3)
AC voltage: 600mV/6.00V/60.0V/600V, ±(1%+3)
DC current: 600 mA/10 A, ±(2%+5)
AC current: 600 mA/10 A, ±(3%+5)
Current note: 600mA hole with 1A fuse, 10A hole without fuse
Resistance: 600.0Ω ± (1.5% + 3); 6.000kΩ/60.00kΩ/600.0kΩ ± (1% + 3); 6,000MΩ, ±(1.5%+5); 60.00MΩ, ±(3%+3)
Capacitance: 60.00nF/600.0nF/6,000μF ± (5% + 5), 60.00μF/600.0μF ± (10% + 5)
Diode: 0.0V ~ 3.3V, 3.3V higher display OL
Continuity: Sound at 50 Ω and below
Item size: 145*86*32mm/5.71*3.39*1.26in
Packing size: 220*150*70mm/8.66*5.91*2.76in
Packaging weight: 600g.
Packing list:
1 * 3in1 digital oscilloscope
1 * Pair of test pen
2*Cables
1*charging cable
1 * Accessory Kit
USD
EUR
GBP
CHF
