Operation Direction:
1. Turn on the pressure regulator to rotate and rotate the handle too much pressure to avoid switches, pressure gauges and pressure valve damage
2. Turn on the power, turn on the power switch (lights)
3. Hand side reel handle, moving the foot switch pedal to the maximum pressure is rotated, the maximum impact force, press the knob to adjust the pressure, while working at each foot switch opening increases, can smoothly control the impact from small to large
4. Load the reel handle lock knife edge can be used.
5. The need to exchange the same operation with carved handle both
6. The need to handle with rotating sculpture, turn on the power switch, the pressure knob (if the foot switch has no effect)
Feature:
1.Input voltage:110v/220v
2.Power:80W
3.Speed:1400rpm/min
4.Air pressure:0~3KG/CM²
Maintenance:
1. The valve periodically drained
2. Regularly adding an appropriate amount of No. 10 machine oil into the reel side handle
3. If the fault should not blindly disassemble, check repair professionals.
V/W:6.9kg
*New Arrival Graver Jewelry Equipment
*Jewelry engraving tool
*Jewelry making equipment
USD
EUR
GBP
CHF
