5 pieces in stock!
Order by 5:30 p.m., delivered tomorrow or come pick up right away in CHUR! Absolutely great device!
170 degree high definition car rear view camera night vision for a variety of cars, trucks, motorhomes, etc.
Description:
1. The anti-fog lens
2. CMOS image sensor
3. Support NTSC video system
4. Embedded mounting in the rear bumper
5. Snap-in design, easy to install
6. high sensitivity and low power consumption
7. High definition and 170 degree wide viewing angle
8. Waterproof, shockproof and trouble-free functions
9. Suitable for a wide variety of vehicles: car, truck, RV, etc.
10. It helps avoid accidents and wear and tear well
11. Extra low illumination of 0.5 lux for clear night vision
12. The simple and humble design and small size do not attract any attention
13. This camera gives you a complete view of the back of your car while you are driving.
14. Low lighting level, it can work within 3 meters at night and other dark environment
15. To protect your car from colliding with invisible obstacles, choose a good quality high resolution camera like ours
16. Perfect solution to avoid poor rear view of your car, boat, trailer, RV, truck or vehicle with no rearview mirror or poor rear view
17. Connect each type of monitor with a yellow composite RCA jack for crystal clear resolution that will fit in most of the vehicle's keyholes. No further installation is required
Specification:
Lens: 2.0 cm
Color: Black
TV system: NTSC
S / N ratio:> 48 dB
Net weight: 134 g
Waterproof: IP66
Power supply: DC 12V ± 10%
White balance: Auto
Synchronize system: Intern
Video cable length: 6.0 m
Video output: 1.0 Vss, 75 ohms
Length angle: 120 ~ 170 degrees
Camera cable length: 56cm
Scanning system: 2: 1 interlace
Power cord length: 41 cm
Image reversal: left-right mirror
High water resistance: IP66
Horizontal resolution: 420 TV lines
Camera size: 3.5 (W) x 2.5 (H) x 3.2 (L) cm
Effective Pixels: NTSC: 510 (H) * 492 (V)
Power consumption: Not more than 300mA
Image sensor: CMOS 1/4 MT9V125 or PC1030, color
Minimum illuminance: 0.2 lux / F1.8 (0 lux with LED)
Storage temperature: -30 ° C to + 60 ° C, maximum 95% RH
Operating temperature: -20 ° C to + 60 ° C, maximum 95% RH
Electronic shutter: 1/50 to 1 / 100,000 seconds, 1/60 to 1 / 100,000 seconds
Installation:
1. Mount the camera in the keyhole of your vehicle
2. Adjust the camera's lens to the best position
3. Connect the power cord to your vehicle's 12V DC power supply
4. Connect the video output (yellow) of the camera to the display of your vehicle
Including package:
1 x video cable
1 x power cord
1 x instruction manual
1 x rear view camera
2 x screws (for bracket)
CHF
