150w 4 wire battery capacity tester 2.4 inch tft color screen CNC type electronic load discharge tester with EU adapter
Specification:
Load voltage-u: DC0V ~ 200V
Load current i: 0 ~ 20a
Load power - w: u×i < =150w (max)
To avoid impulse damage, the total load power is limited to 60W when the load voltage is >= 120V
Capacity dosing range: 0~999999mah
Energy measurement range: 0~999999mwh
Applicable power supply: DC12V 1A/PD12V PD voltage trigger power supply (must have a PD charger)
Wiring mode: Four-wire system a + v + v-a-
Display mode: 2.4 inch TFT color screen
Control operation: 4 button control
Heat dissipation mode: active heat dissipation load power over 10w or core temperature >= 55°C to start the fan
Overvoltage protection: Support
Over current protection: Support
About energy protection: support
Over temperature protection: The core temperature exceeds 100°C to stop the load (not adjustable)
Time limit discharge: support
Specified voltage shutdown: Support
Characteristics:
This product supports 0~200V, 0~20A within the maximum 150W load
Over-voltage, over-current, over-voltage, over-temperature protection and reverse connection protection below 100V
Support timing shutdown and specified voltage shutdown
Four-wire wiring system for more accurate capacitance measurement
Active heat dissipation with load power over 10w or core temperature >= 55 °C to start the fan
4 test modes
1. Constant current mode (cc): supported
2. Constant resistance mode (CR): supported
3. Constant Power Mode (CP): Supported
4. Constant voltage mode (CV): supported
Online PC View: supported
Using a USB Android data cable (not included), you can connect to a computer and download the Ch340 driver. You can view curve data and export data such as time, voltage, current and power
Download software address (Ask customer service)
External temperature test: supported
Supports external temperature detection, and the thin film temperature probe can detect battery temperature!
Restore factory settings:
? turn on a device
? Long press the start button to enter the device background
? Select Factory Reset
?.Long press the Start button to return to the main testing interface
Packing list:
1. 150w cnc electronic load x1
2. 12V PD Trigger x1
3. 4 interface adapter x1
4. User manual x1
(This package does not include temperature probes, DC12V power supplies and PD chargers
You can use your own PD charger (purchased with a voltage of 12V)
USD
EUR
GBP
CHF
