Feature:
1. Temperature controller: with temperature display, heating range from 50 to 400 degrees, manual button control, convenient to use, easy to operate.
2. Push rod switch: push forward does not let go, the machine stops after a few seconds, the machine stops immediately after the push rod is released, pull the push rod back to reverse, the timer does not work.
3. How to use: The yellow button can turn the light on and off with one button. A small battery above 12v 20a should be prepared and connected to the fog machine through the power cable for mobile use.
4. Anti-slip: the bottom has a rubber foot mat design, can be placed on the desktop, not easy to tip upside down and will not scratch the desktop.
5. Portable handle design: this 12v fog machine has a portable handle that makes it easy to carry outside, offering you a great usage experience.
Specification:
Item type: Mite spray mist machine
Material: Iron
Weight: about 2514g/88.7oz
Product size: about 24.5x11.8x12cm/9.6x4.6x4.7inch
Battery (comes with built-in battery): lithium battery, 1500mAh
Rated power: DC 12V 250W
Note: Delivery comes with 3, which can only be started after customers install it after receiving the product
Applicable object: bee
Use: cleaning equipment
Qa: wearable parts include clogged heating cores, worn pump head tubes
Cleaning function:
After using the entire field, wait for the machine to drop close to 200 degrees, take the straw from the medicine pot directly into the cleaning agent bottle before pressing the push rod for more than 15 seconds to complete the cleaning. (When using pure water, the cleaning temperature must be reduced to below 100 degrees)
Spray method:
The first use is about 1 second or less, then slowly increase the dosage, the amount of medicine used in each is different, according to the bee colony potential, increase or decrease the number of seconds, the specific operation is as follows.
1. Door spray: The weather temperature is low honey bee door does not fan wind, you can spray from the door in. The nozzle does not need to insert into the door, sprayed about 1 to 2 cm from the door, but also from the side no bees no door oblique spray. (Disadvantage: hot bee fan mist is blown out, the effectiveness of the drug close to 30%)
2. Nail eye spray: Nail eye spray into the nail eye, to ensure that no propolis clogged in the nail eye, if it is a high box group, it can be drilled in the step box from the queen board close to 2 cm. The above nail eye to the side beam can not be on the bee road. The above nail holes should be on the side beams and not on the bee way. (We suggest that this method is less wasteful and effective)
Package list:
3 x Wire
1 x Specification
1 x Mite spray machine
1 Cable
Note:
Customers need to purchase the special oil for killing mites (not supplied)
Note:
1. The machine needs to use their own 12V (capacity of 20A or more) battery, the estimated spray 200 groups, the power cord can not be extended to use.
2. Do not use for a long time, after spraying essential oil can not pull the push rod until a large number of bubbles in the pot and then push forward for more than 10 seconds.
3. Prohibit the machine high temperature when the water test, must not use similar diesel oil spray, so as not to cause blockage of the pipeline, to prevent rain into the machine internal damage to the electronic components.
4. each use of attention to the pot suction pipe filter is intact, so as not to inhale foreign matter blocking the heating core.
5. timer less than the scheduled time to stop, immediately hand loose push rod in manual control to spray, so as not to cause more injury bee.
USD
EUR
GBP
CHF
