Google Bewertung
We use cookies to improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.
All Products Free Shipping
Your position: Home / Home & Garden / Smart Home

100 mm Tuya Smart Life WIFI Smart Bathroom Extractor Fan Nova100 with Humidity Sensor, Motion Detector, Timer

Item number: TO2415
Price:
CHF
CHF110.00
Quantity:
-
+
(10 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
Please select the information you wantX
  • Description
  • FAQ
  • Reviews

100 mm Tuya Smart Life WIFI Smart Bathroom Extractor Fan Nova100 with Humidity Sensor, Motion Detector, Timer

 

Description
To use it, you only need to connect a live wire and a neutral wire.

With the app control, you can easily adjust the fan speed, humidity level, and timer delay settings anytime, anywhere.

At the same time, the room temperature (°C) and humidity (%) can be continuously monitored in real time within 24 hours.

All different functions in one fan:

- There are three standby mode options: stop, low speed, and high speed.

- The humidity sensor and motion sensor can be turned on or off as desired.

- The humidity can be adjusted from 40% to 100%.

- The motion sensor detects movement at a distance of approximately 5 meters.

- The timer delay setting can be adjusted from 1 to 60 minutes.

All fans are equipped with ball-bearing motors with thermal protection and an ABS rear damper suitable for wall/window mounting. If you plan to install it on the ceiling, be sure to remove the ABS rear damper. We also include a replaceable PET rear damper in the set, which is suitable for wall, window, or ceiling mounting.

Before connecting your device, make sure your router's 5G frequency range is turned off and use 2.4 GHz Wi-Fi to connect the fan. Do not use Wi-Fi repeaters or VPN/proxy services when setting up the fan. Also, make sure you enter the correct Wi-Fi password.

Please note for all customers: "We do not accept disputes regarding "item does not match the description" as we have removed all potentially misleading words or photos from the listing." If you are unable to fully understand the listing, please try contacting our seller first. For all customers who have already made a purchase: If an item is damaged or you find that the fan is not working as expected, please try leaving a message and contacting us via Messages. Our customer service will contact you and respond within 12 hours. Thank you for your time!

Specifications:
- Model Number: Nova100 (with ABS/PET Backdraft Damper)
- Cover: ABS plastic
- Voltage: 220-240 V~, 50 Hz
- Power: 6 W/12 W
- Cutout Size: 100 mm
- Maximum Airflow: 52 m3/h / 90 m3/h
- Noise Level at 3 meters: 22 dB / 35 dB
- Timer: Adjustable timer delay from 1 to 60 minutes
- Humidity sensor: Adjustable humidity from 40% to 100%
- Motion sensor: Detection zone ≈ 5 m

FAQ
- The detection range of the microwave sensor is approximately 5 m. Due to the high sensitivity of the microwave sensor, if it is less than 5 m, it can penetrate walls, wooden doors, and glass, but its sensitivity will be reduced to some extent.

- If there is no Wi-Fi, please use the personal hotspot of your second phone to connect the Nova100 first, and then control the fan only via Bluetooth.

- To simplify wiring, the ON/OFF button we designed in Smart Life acts as a switch function. Only the L line and N line for power supply are acceptable. An additional manual switch is not required.

- When connecting the fan, the real-time T°C (temperature/temperature) and H% data displayed incorrectly may be caused by condensation.

Please try again first to check the T°C and H% module, making sure it is securely attached to the main board.

If the error persists, please unplug the power supply. Dry the module's white cover with a hairdryer at a height of approximately 15 cm for less than 10 seconds. Then let it cool down for a while and reconnect the power supply to restart the fan to check if it returns to normal.

Note: Nova100 uses the latest capacitive MEMS temperature and humidity sensor: high accuracy (±3% RH), fast response (second stage), but also more sensitive, and fully calibrated before leaving the factory.

-If you find that the circuit board indicator is not flashing when connecting for the first time,

Please connect a switch and turn it on/off five times within 5 seconds. The fan will reset.

- To ensure normal operation of Nova100, a continuous 24-hour power supply is required for the following reasons:

1. It reduces the likelihood of water condensation on the T°C & H% module.

2. When the power is reconnected, the fan will automatically start in high-speed mode. The timer will delay for 1 minute, after which you must RESET the fan! We have designed an ON/OFF button in the app. Clicking the ON/OFF button prevents the left timer delay and the high-speed working status, and immediately sets the fan to normal operation.
Average rating:
Share your thoughts with other customers
Write a review