CHF
- X431 IMMO Plus
German, French, Italian, English, Spanish, Portuguese, Chinese, Japanese, Russian, Polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Persian, Romanian, Serbian, Finnish, Swedish, Czech
It is the only product in this price range that is compatible with CAN-FD protocol and supports the latest for GM vehicles manufactured after 2020. Adopts advanced CRC algorithms to fit more data from 8 to 64 bytes in the can frame, which runs faster than other products and reduces the risk of undetected errors to greatly improve the user experience.
Support for chevrolet onix 2020-2021 year
Support for chevrolet tracker 2020 year
Support for Chevrolet suburban 2021 year
Support for chevrolet tahoe 2021 year
Support for buick
Support for cadillac escalade 2021 year
Support for cadillac escalade 2021 year
Support for gmc yukon 2021 year
Support for gmc yukon xl 2021 year
Support for holden
Support for daewoo
Support for alpheon
Support for ravon
Support for pontiac
Support for saturn
Support for hummer
* Strong core, large memory, great battery life.
* Lt integrates professional anti-theft matching, anti-theft programming, full-model system-wide diagnosis of basic functions and special functions. A machine with multiple functions and a high performance-cost ratio.
* All-round anti-theft matching, fast and accurate anti-theft data reading.
* For the anti-theft matching function of many models in Asia, Europe and America, more brands will continue to be launched, up to 60 brands.
* Support for full system-wide diagnosis of basic functions (reading version information, reading dtcs, deleting dtcs, reading data streams) for global 110 brands.
* Support 10 special functions such as service lamp reset, throttle matching, steering angle reset, brake pad reset, tire pressure reset support the VIN intelligent identification function to quickly enter diagnosis.
* Fast and accurate diagnosis.
1. Independent anti-theft menu, more convenient operation
With the unique anti-theft matching and anti-theft programming modules, thorough development and optimization has been carried out for the anti-theft software of American, European and Asian car models.
2. powerful anti-theft function, support a wide range of models
support anti-theft type identification, anti-theft password reading, remote control matching, key matching, key chip reading and writing, anti-theft Parts replacement and other functions, support up to 60+ brands, and model coverage continues to grow
3. Anti-theft advantages
* Support replacement or cloning of for vw/audi mqb platform engine ecu (no need for the original car engine ecu data, it can be read directly from the key) *
Support replacement or cloning of for vw/audi mqb platform transmission ecu
* support replacement for audi (0aw/0 b5) fifth generation gearbox ecu
* support read/write and cloning for vw fourth generation uds engine ecu
* support cloning in bank mode without disassembly for more than 170 types of bosch engine ecus, more than 10 kinds of Siemens motor ecus and 18 kinds of gear ecus (for various European, American and Asian models, and continue to increase)
* Support delete function for Mercedes-Benz engine, gearbox, els and for BMW gearbox.
* Support matching function and password calculation function for all models of for chery sedan and for Jac passenger car up to 2021
4. Anti-theft module replacement
Support anti-theft module replacement function for models like bmw, for mercedes-benz, for volkswagen, for audi, for porsche, for honda, for nissan, for hyundai, for kia, for byd, for changan automobile, for wuling baojun, for gac trumpchi, for saic maxus, for big wall motor, for chery, for dongfeng , for fengxing and for jac persons motor vehicles.
5. Read anti-theft password
Support anti-theft password reading function for models such as BMW, Mercedes-Benz, Volkswagen, Audi, Peugeot, Citroen, GM, Nissan, Hyundai, Kia, Chery, Dongfeng fengxing and for jac persons motor vehicles.
6. Key Matching
Support key matching function for models such as Ford, GM, Mercedes-Benz, BMW, Volkswagen, Audi, Porsche, Peugeot, Citroen, Land Rover, Jaguar, Honda , for Toyota, for Nissan, for Hyundai, for Kia, for big wall motor, for chery, for changan automobile, for jac passenger carriage, for wuling, for baojun and for byd.
Support 90+ brands of independent anti-theft matching software for American, European and Asian models. Supporting further in-depth development and coverage of anti-theft software for various models. Support more read password, add key, lose all key and anti-theft related module replacement functions. Menus are streamlined, the operation process is more convenient, and more brands keep launching.
Start X431 immo pro supports anti-theft programming function
Support to read/write car key chips, read/write eeprom chips, read/write MCU chips, read and read/write eeprom and write engine ecu and transmission ecu
The full systems of the car mainly including drive system, chassis sytem, body system, electrical system:
1. pcm (drive system): engine, gearbox, transfer case, electric machine electronics, fuel pump, gearbox and more...
2 .Chassis system: accumulator management electronics, steering, integrated chassis management, tire pressure control, active cruise control, braking system, suspension, TPMS and more... 3. bcm (
body system): srs airbag, camera, audio radio, gateway, cluster dashboard, rain sensors, charging interface module, parking assistance, power control unit, touch box, light, battery charging system, head-up display, wiper control system, roof, seat and door motor system, immobilizer, Abs esp system, air conditioning. electric windows, telephone and more...
4. Electrical system: including engine and power transmission central control system, chassis integrated control and safety system, intelligent body electronic system, communication and information/entertainment system. It supports the detailed function: -Read
fault
codes : read and decode the dtcs to determine where the error position is;
-Clear Trouble Codes: Clear the dtcs to power off the mil after repairs.
-Ecu Information Retrieval: Allows vehicle information retrieval;
-Graph Live Data Stream: View the dynamic data stream to determine the vehicle condition
With the diagnostic function you can improve performance, save energy, reduce emissions and more as follows:
For the engine: Detect common problems such as poor lubrication, failing oil pump, oil deposits and dirt, insufficient fuel and air compression, leaking engine coolant, blocked engine radiators, prolonged engine detonations, damaged oxygen sensors, aged spark plugs, etc.
For srs: pinpoint the problem area such as: a bad seat belt, a corroded crash sensor, or water ingress in a connector, etc. For abs:
diagnose blown sensor fuse, low brake fluids, and faulty sensor, etc.
For transmission : Avoid grinding or shaking in transmission, whining, buzzing or knocking noise, burning smell, gear slipping, low or leaking transmission fluid, etc. For tpms: Check for low tire pressure problems, faulty tire pressure monitoring module,
unknowns tire sensor, tire sensor identification error, etc.
1. Oil Reset Service
This function allows you to reset the oil service for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle's driving conditions and weather events.
It must be performed in the following cases:
1. When the service lamp is on, run the vehicle diagnosis first for troubleshooting. Then reset the mileage or driving time to turn off the service lamp and allow a new driving cycle.
2. If the service light is not on, but you have changed the engine oil or the electrical
equipment that monitors the life of the oil, you need to reset the service light.
2. Electronic parking brake reset
This function allows you to reset the brake pad after replacing the brake pad. This must be done in the following cases:
1. The brake pad and the brake pad wear sensor are replaced.
2. The brake pad indicator light is on.
3. the brake pad sensor circuit is short, which is restored. 4. the servo motor is replaced.
3. Steering Angle Calibration
This function allows you to reset the steering angle after replacing the steering angle position sensor and replacing steering mechanical parts (e.g. gear, steering column, tie rod, steering knuckle), performing four-wheel alignment or recovery the body.
To reset the steering angle, first find the relative zero point position so the Ecar can drive in a straight line. Using this position as a reference, the ecu calculates the exact angle for the left and right steering.
4. ABS Bleeding
This feature allows you to perform various bi-directional tests to check the anti-lock braking system (ABS) operating conditions.
It must be done in the following cases:
1. When the abs contains air.
2. When the abs computer, abs pump, brake master cylinder, brake cylinder, brake line or brake fluid is replaced.
5. Learn gear
This feature allows you to perform tooth learning for the car to turn off the mil.
It must be performed in the following cases:
1. After the engine ecu, crankshaft position sensor or crankshaft flywheel is replaced.
2. the dtc "tooth not learned" is present.
6. immo service
This function allows you to run the anti-theft key matching function, so that the immobilizer control system on the car identifies and authorizes remote control keys to use the car normally.
It must be performed in the following cases:
When the ignition switch key, ignition switch, combined instrument panel, ecu, bcm or remote control battery is replaced.
7. Injector Coding
With this function you can write the actual code of the injector or rewrite the code in the ECU to the injector code of the corresponding cylinder to more precisely control or correct the cylinder's injection quantity.
It must be done in the following cases:
After replacing the ecu or injector.
8. Battery maintenance system reset
This function allows you to perform a reset operation on the vehicle battery monitoring unit, in which the original low battery error information is displayed and battery adjustment is performed.
It must be performed in the following cases:
1. The main battery is replaced.
2. The battery monitoring sensor is replaced.
9. Diesel particulate filter (dpf) regeneration
This function allows you to remove pm (particulate matter) from dpf filter by continuous combustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reduce pm ignition combustion) to stabilize the filter performance.
It must be performed in the following cases:
1. The exhaust back pressure sensor is replaced.
2. The pm trap is removed or replaced.
3. The fuel additive nozzle is removed or replaced.
4. The catalytic oxidizer is removed or replaced.
5. the dpf regeneration mll is on and maintenance is being performed.
6. The dpf regeneration control module is replaced.
10. Reset of the electronic throttle position
With this function you can make initial settings to throttle actuators and return the learned values stored on the ECU to the standard state. Thus, the actions of the regulator can control the throttle (or idle engine) to adjust the amount of air intake.
11. gear matching
This feature allows you to complete the gear yourself learning to improve gear shift quality.
It must be carried out in the following cases: when the gearbox is disassembled or repaired.
12. afs (adaptive front lighting system) reset
With this function you can initialize the adaptive headlight system.
13. Sunroof initialization
This function allows you to set the sunroof lock, closed when it rains, sliding/tilting sunroof memory function, temperature threshold outside the car, etc.
14. Suspension calibration
This function allows you to adjust body height.
It must be performed in the following cases:
1. When replacing the body height sensor or the control module in the air suspension system.
2. When the vehicle height is incorrect.
15. egr adaption
This function is used to learn the egr (exhaust gas recirculation) valve after it has been cleaned or replaced.
16. Calibration of the seats
This function is used to match the seats with the memory function that have been placed and repaired.
17. Tire Reset
This function is used to set the size parameters of the modified or replacement tire.
18. Coolant Bleed
Use this feature to activate the electronic water pump before bleeding the system.
19. adblue reset (diesel engine exhaust gas filter)
After the diesel exhaust gas treatment fluid (auto urea) has been replaced or topped up, a urea reset operation is required.
20. nox sensor reset
NOx sensor is a sensor that is used to record the level of nitrogen oxides (NOx) in engine exhaust gases. When the Nox fault is reinitialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter's learned value, which is stored in the engine ECU.
21. AC system initialization
AC system releam/initialization must be performed when the vehicle AC ecuor actuator is replaced or the ecu memory is lost.
22. High voltage battery detection
This function is used for high voltage battery diagnosis and status information detection.
23. Calibration window
This function is used to perform door window adjustment, restore ecu initial memory, and restore power window auto ascending and descending function.
24. Language change
This function is used to change the system language of the vehicle's center console.
25. af reset
This function is applied to set or learn airlfuel rate parameters.
26. Transport mode
In order to reduce the power consumption of the vehicle, the user can perform the following operations: limit the vehicle speed, do not wake up the network for the open door, and disable the remote key, etc. In this case, disable the transport mode required About the normal vehicle.
27. stopl start reset
This function is used to open or close the automatic start stop function viasetting the hidden function in Ecu (the prerequisite is vehicle equipped with hidden function and hardware support).
28. Intelligent cruise control system reset
This function is used to adjust the intelligent cruise control module after it has been replaced or repaired.
29. Engine Power Balance Monitoring
This function is used to monitor the crankshaft acceleration in the power stroke of each cylinder to determine the relative power being provided by each cylinder.
30. Gas Particulate Filter (gpf) Regeneration
This function is used to perform gpf replacement or regeneration after fuel consumption is increased and engine output power is reduced resulting from long-term operation of gpf.
31. Motor angle calibration
This function is used to perform motor angle calibration when the rotational position detected by the motor angle position sensor differs from the actual rotor field position.
32. automatic air conditioning initialization software reset service (reset ACINI)
33. electronic water pump starts reset (reset coolant)
34. Reset ECU
35. Set back frm
36. Reset clutch
37. Reset gate
38. Reset Turbo
39. Reset air sensor
1. Remote Diagnosis
Remote diagnosis can realize real-time communication between equipment and equipment or between equipment and computer, complete vehicle remote diagnosis, and make it a reality for repair technicians to diagnose vehicles thousands of miles away.
2. Information center
The information center integrates maintenance information, general information and equipment information and is an information retrieval center.
Equipment information includes Product Manuals, FAQs and more. The product manuals are provided in 9 languages. Switch the appropriate language to view the manuals in the appropriate language.
Service information includes operational skills, dtc help, vehicle service technical manuals and anti-theft database.
3. Diagnostic feedback
If users encounter abnormal models and functions under special circumstances during use, they can give opinions on the start through diagnostic feedback, and special technical personnel will follow up and deal with the problems in a timely manner.
4. Diagnostic records
During each diagnostic process, a vehicle diagnostic record is automatically generated, which can be easily viewed and compared at any time and helps in troubleshooting.
5. Review testable models
You can always check the supported brands, models, systems and functions online.
How to start X431 immo pro
Connection method 1: directly to obd16 for key matching, data read/write, etc.
Connection method 2: place the anti-theft eeprom or mcu chip into the chip burn-in socket, and then plug the Chip burn-in socket into the anti-theft matching programmer locker slot to realize the data exchange between the ic anti-theft chip and the diagnostic host.
Connection method 3: after removing the ecu from the car, connect the anti-theft ecu pin to the anti-theft programmer DIY slot via the connection cable to enable data exchange between the anti-theft ecu and the diagnosis host.
Connection method 4: After the ECU is removed from the vehicle, it is directly connected in bank mode to realize the data exchange between the anti-theft ECU and the diagnosis host.
For immo function:
Europen cars:
for audi, for benz, for bmw, for citroen, for gm, for land rover, for mazda, for opel, for peugeot, for porsche, for renault, for mg (saic), for seat, for skoda, for sprinter, for suzuki, for ford, for volvo, for vw
China cars:
for gwm, for changhe, for brilliance, for chery, for faw tianjin, for zx auto america
cars:
for aston martin, for fiat (brazil ), for chrysler, for ferrari, for fiat, for maserati
Asia cars:
for baic, for changan, for byd, for foton, for haima, for honda, for hyundai, for kia, for maxus, for mitsubishi, for nissan, for perodua, for proton, for Subaru, for Toyota, for Zotye
For diagnostic function:
European cars:
For martin aston, for benz/maybach, for bmw/mini/hcbmw/rollsroyce, for citroen/fukang, for ferrari, for fiat/abbas/lancia/romeo/nanjingfiat, for gaz, for izh, for land rover/jaguar, for martha lahti, for opel/gmsa/vauxhall, for paz, for peugeot/dfpeugeot, for porsche, for renault, for dacia, for saab, for skoda, for seaz, for seat, for smart, for transporter & v-class, for uaz, for vaz, for volvo, for vw/bingley/bugatti, for zaz
China cars:
For beijing, for chang'an, for chang cheng, for changhe, for xiaokang, for dr, for ecuaid, for byd, for foton, for hafei, for haima, for brilliance, for jiang ling, for iveco, for jac, for gonow, for xiamen golden, for kowloon, for lifan, for sgmw, for saic chase, for mvm, for chery, for saic & mg, for sgm/chevrolet/chbuick/chcadllac, for gac chuan qi, for tianjin faw, for zhong shun, for zotye, for zhong xing
America Cars:
for Brazil Fiat, for GM, for Chrysler/Dodge/Jeep, for GM/ Buick/ Cadillac/ Chevrolet, for Ford/ Chinaford Lincoln/ European Ford, for Vinfast Asia
cars:
for daewoo, for daihatsu, for honda/acura/dfhonda/gzhonda, for hyundai, for indian mahindra, for indian maruti, for indian tata, for jpisuzu/tlisuzu, for kia, for luxgen, for mahindra, for maruti, for perodua ( perodua), for mazda/yqmazda, for mitsubishi, for nissan/infinitv/dfnissan, for perodua, for proton, for saip, for ssangyong, for subaru, for suzuki, for tata, for toyota/lexus/tjtoyota Australia car:
for
holdon
LAUNCH X431 immo per parameter
Processor: 2.0GHz 4-core
Operation: Android 10.0 system
Memory: 4gb
Storage: 64gb
Battery: 47880mwh (7.6V,6300mAh)
Display: 8 inch, 1280*800
Camera: rear 8mp
Wifl: 2.4 ghz/5ghz (dual frequency)
Interface: Type a*1 & Type c*1
Operating temperature: 0~50℃
