BUYBEST.CH Blog – Product Guides, Comparisons & Tech Tips
Discover helpful product guides and comparisons on automotive tools, electronics, household gear and more. Our expert blog helps you make smarter buying decisions — clearly and practically explained.
By Alice | 04 June 2020 | 0 Comments

ipega PG-9139 Controller Wireless Bluetooth Gamepad Joystick Gaming Joypad Joy Pad For NS Switch Pro



Characteristics:
1. Support the interchangeable 3D function, replace the 3D and function key position according to user experience.
2. Support Switch, Android, PC (Win7 8 10).
3. Bluetooth 4.0 radio connection.
4. Easy to use, optimized design, perfect feeling.
5. LED backlight with cool color.
 
Specification:
Model: PG-9139
Working voltage: DC3.7V
Working current: <35mA
For continuous use: more than 15 hours
Sleep current: <40uA
Charging voltage / current: DC5V / 500mA
Bluetooth 4.0, transmission distance: ≤8M
Battery capacity: 650mAh
Standby time: 30 days at full power
 
Operating instructions of the control:


N-switch mode:
1. Pairing connection: Press the small button on the right side of the back for 1 second to enter the Bluetooth pairing status. The LED 1-4 indicator lamp flashes in the selection frame mode and the middle LED LED flashes in 7 colors. If the pairing is successful within 2 minutes, the handle goes into the idle state.
2.Pairing success: After successful Bluetooth pairing, the LED1-4 indicator lamp always lights up according to the standard channel assigned by the host, and the middle colored light enters the 7-color cycle and flashes slowly (the interval between the two colors is 3 seconds).
3.Pair the connection back: Press the HOME button for 1 second to access the Bluetooth connection status. The LED1-4 indicator lamp flashes in the selection frame mode and the middle LED LED flashes in 7 colors.
 
PC mode:
1. Connection method: Connect the computer and the handle directly to the data cable. The LEDs of the XINPUT mode LEDs 1, 2 and 3 always light up.
In DINPUT mode, LEDs 1 and 2 always light up. In both modes, the central lantern changes to the slow 7-color flash state (3 seconds between the individual colors).
2. Press and hold the "-" (SELECT) and "+" (START) buttons simultaneously for 3 seconds to switch between the XINPUT mode and the DINPUT mode.
 
Programmable button function:

1. The programming function can implement any of A, B, X, Y, L, ZL, R, ZR.
2. Set the programming button: First press and hold the "+" (START) button and then press the button that has to be programmed on the back. Then the white light flashes twice and then stays on. At this point, release the key and press any function key (A, B, X, Y, L, ZL, R, ZR) that needs to be copied again. This means that the setting is complete and the programming mode is automatically activated. It is ended after the setting is complete.
3. Canceling the programming button: First press and hold the "+" (START) button and then press the programming button, which must be canceled to cancel the programming setting.
 
TURBO function:
1. The action button contains (A / B / X / Y / L / ZL / R / ZR) eight buttons, all of which can be used with the TURBO function.
2. The TURBO switch can be set manually using any action key.
3. Setting method: First press the action button and then simultaneously the TURBO button. The TURBO function is activated. First press the action button and then the TURBO button. The TURBO function is switched off.
4. If the handle is switched off, switched off, put into the idle state and the handle is restarted, the turbo function is automatically deleted before setting. If the turbo function is activated, it must be reset.
 
Handle Charge / Sleep / Wake-up / Shutdown / RGB light settings:
Charge: When the LED is off, LEDs 1, 2, 3 and 4 flash simultaneously. The middle color is solid green, LEDs 1, 2, 3 and 4 are off. The middle color is constant red.
When charging while connected, the LED flashes slowly in the current mode, the flashing light continues to flash in the current mode and the indicator for the current mode is always on.
Low battery: In each mode, the low battery alarm LED4 flashes, and in the flashing mode the current mode continues to flash.
 
List:
1 * Wireless controller
1 * Cross Disc Key
1 * TYPE C line
1 * instruction manual

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code