AUTOOL SDT106 Car Smoke Leak Detector Automotive EVAP Leakage Gas Leak Locator Oil Pipe Generator Diagnostic Tool
How to do leakage test?
1. Fill 20ml baby oil to the detector for the first time. Open the motor cover, and hang the detector in the cover.
2. Pull the tube that needs to be connected to detector.
3. connect detector with DC12V battery, turn on the power switch, and the detector starts to work.
4. in about 30 seconds, the pipe will be filled with smoke. Check the leakage points. Please use head lamp if necessary.
AUTOOL SDT 106 Auto Smoke Leak Detector Features:
1.[wide range of applications] For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speed boats. works on all car power and models.
2.[powerful and easy to operate] The AUTOOL SDT 106 has its own air pump, it does not rely on other air machine, connect the detector with DC12V battery, it can output many smoke within 30 seconds after power on.
3. advanced technology] It works on the EVAP system (we also have another version that specially for EVAP system).
4. overheat & anti-frost protection] The detector has smart protection.
Main unit structure:
Hook: To hang the detector when detection.
Working indicator: It is lit when the detector is working.
Power switch: Power it on, and the detector is working
Smoke output pipe: The smoke socket, the connection with detection port
Power Clamp: To connect with vehicle battery. The voltage is DC12V.
Caution:
1. When using this AUTOOL SDT 106 car smoke leak detector for the first time, fill with 20ml oil. Please be careful NOT to exceed this range.
2. Testing liquid: both liquid kerosene and baby oil are OK.
3. fresh oil can be filled with only when the smoke calls thin, and it can not be filled over 20ml at any time.
4. Before filling fresh oil, pour the left oil into the detector & replace the detector oil regularly.
5. during the process of leak detection, please keep away from smoke-sensitive parts.
6. do not run the detector over 8 minutes continuously. It needs interval rest.
7. The detector has an intelligent protection, when it exceeds the working limit, such as over 75 ?, it will automatically turn off the power. In this case, please operate it later.
8. The round part of this detector has temperature, please be careful to avoid burn.
9.When the test tube needs to be separated in the middle, please secure the other side with a rubber stopple.
Packing List:
1pc* AUTOOL SDT106 Car Smoke Leak Detector Main Unit
1pc * Hook (with hand tighten nuts)
1pc * Rubber connection parts
1pc * Hard rubber hose connector (with serial specification)
1pc * Standard cone adapter
1pc * Power cable clamp
1pc * Valve core key
1pc * Test oil refill bottle (oil not included)
1pc * EVAP special connector
1pc * Smoke hose
1pc * User Manual
CHF
